Dolby Laboratories Digital-Satellite-Receiver manual Only for receivers equipped with this feature

>Use the arrow keys up/down to move the marker around the list one line at a time.

>Use the arrow keys right/left to move the marker backward or forward in the list one page at a time.

Date

>Use the arrow keys to mark the column Date.

>Use the numeric keys to enter the date on which

you wish to record a programme.

Start

>Use the arrow key right to mark the column Start.

>In this line, use the numeric keys to enter the star- ting time for the timer.

Stop

>Repeat the steps as described under “Start” to enter the stopping time.

So that all timer events can be accommodated, there should be an interval of at least one minute between the stopping time of one timer event and the starting time of the next timer event! Should there be an overlap between two timer events, these will be highlighted in red.

Repeat (optional)

>Use the arrow keys to mark the column Rep.

>Press OK.

A selection window will be displayed, offering various suggested repeating intervals.

1x Timer used once only D Daily repeat

1 W Repeat once weekly

1-5Repeat only on weekdays

6-7Repeat only on weekends

>Use the arrow keys up/down to select the desired function.

>Press OK to accept the setting into memory.

Type

>Use the arrow keys to mark the column Type.

>In this line, press OK to enter the desired status.

1. VCR

Your digital receiver will be switched on and off for the programme selected.

If the receiver was switched on by the timer, this will be indicated by “rEc” on the display*. Most of the functions of the remote control will be de-activated to prevent an accidental interruption of the recording. In standby operation the active timer will be indicated by a blinking colon in the time display.

*Only for receivers equipped with this feature

38