For daily use
Switching on and off
>Switch on the digital receiver by pressing the On/Standby key, either on the receiver or on the remote control.
>Press this key again to switch the receiver off.
>The receiver is now in standby mode, the display* on the receiver shows the time.
Programme selection
Using the programme up/down keys
>Use the programme keys up/down either on the remote control or on the receiver to move up or down
one programme slot at a time.
Using the numeric keys
>Use the numeric keys to enter the desired program-
| me number. |
|
|
For example |
|
| |
1 |
|
| for programme slot 1 |
1, | then 4 |
| for programme slot 14 |
2, | then 3, | then 4 | for programme slot 234 |
When entering programme numbers consisting of several digits, you have approximately 3 seconds after pressing a key to complete the entry.
If you wish to enter a number consisting of only one or two digits, you can speed up the switching procedure by keeping the key depressed a little longer on the last digit.
Using the programme list:
>Press OK.
>You can now use the arrow keys up/down to mark the desired programme.
>Press the yellow function key Preview to display a preview of the marked programme.
>Press OK to switch to the marked programme.
>Use the arrow keys up/down to move the marker by one line at a time within the list.
>Use the arrow keys right/left to move the marker
around the list one page at a time.
Volume control
>You can regulate the volume of your digital receiver: press the key Volume + to increase the volume, and Volume - to decrease it.
>Press the key Sound on/off to switch the sound on or off (mute).
*Only for receivers equipped with this feature
66080903