Dolby Laboratories Digital-Satellite-Receiver manual Position A/Option a

Position A/Option A

>Use the Up/down arrow keys to select the satelli- te you wish to receive at the DiSEqC setting Position A/Option A, and confirm by pressing OK. (Fig. 5-7)

Position B/Option A

>Use the Up/down arrow keys to select the satelli- te you wish to receive at the DiSEqC setting Position B/Option A, and confirm by pressing OK. (Fig. 5-8)

Position A/Option B

>Use the Up/down arrow keys to select the satelli- te you wish to receive at the DiSEqC setting Position A/Option B, and confirm by pressing OK. (Fig. 5-9)

Position B/Option B

>Use the Up/down arrow keys to select the satelli-

te you wish to receive at the DiSEqC setting Position B/Option B, and confirm by pressing OK. (Fig. 5-10)

With the next step you can check again on the configuration of your antenna.

>If you wish to confirm this setting, use the arrow keys up/down to select the field yes, and confirm by pressing OK. (Fig. 5-11)

Updating the software (Pre-condition: Astra 19,2° recep- tion)

When you have completed the settings for the antenna confi- guration, the digital receiver will check on whether there is an updated version of the software for your unit available via satellite. If a new version of the software is available, you can process a software update automatically. Use the arrow keys right /left to select the field Update, then confirm by pressing OK. (Fig. 5-12).The new software for your unit will now be downloaded. This procedure can take several minutes.

Searching/scanning for channels/stations

When the software version has been checked, and updated if necessary, you can proceed to the programme search.

>Use the arrow keys up/down to mark the field All Programmes, if you want to search for both free-to- air and encrypted programmes, or All unencrypted Programmes, if you want to search only for free-to- air programmes. (Fig. 5-13)

>Press the OK key now to confirm, and an automatic programme scan will be carried out. All the satellites selected in the antenna configuration step will be scanned for programmes. This procedure may take several minutes. Please note any messages displayed

(Fig. 5-7)

(Fig. 5-8)

(Fig. 5-9)

(Fig. 5-10)

(Fig. 5-11)

15