Chapter 9
Controlling Other Components
Instructions | Additional Information |
3For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner, or amplifier. Then press the STAR (*) button.
4If you want to program Limited Mode, press PAGE UP. If not, skip to step 7.
5Press POWER.
6Press the UP or DOWN ARROW repeatedly until the device turns off.
7Press POUND (#).
8Turn the device back on and try some other buttons to make sure they work.
9If necessary, repeat this procedure until you’ve tried all the codes.
This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 4.
See Limited Mode for more information.
This puts your remote in the scan mode.
As you press the UP or DOWN ARROW, the remote tries each code in the memory to see if it can turn off your device. When the device turns off, you have found a code that might work.
Note: The mode button for the device will flash rapidly eight times when you’ve scanned all the codes for that device.
The mode button flashes three times if you have entered the code correctly. This stores the code you found.
Press POWER to turn the device back on. Try some other buttons to make sure they work. Sometimes POWER works when other buttons don’t.
You may need to repeat the scan to find the best code for your device.
52