Installation and connection
Installation steps
Installation of cable duct and mounting plate
Note: | If you have previously used a Kathrein HDM140/141 flexible |
| satellite mast or another mast with a diameter of 34 mm, you can |
| continue using the existing duct hole in the roof (if space allows). |
Figure: A |
|
•In the centre of the intended position of the turntable, drill the opening for the cable duct with a circular cutter (Ø: 38 mm). Deburr the hole with a round file or emery paper.
•Provisionally insert the roof duct into the drilled hole (Fig. A).
•Place the mounting plate on the roof of the vehicle, such that the centre hole is positioned centrally to the cable duct. The arrow symbol must be visible from above and point forwards in the direction of travel (Fig. B).
Figure: B
|
|
|
|
| Arrow in driving | ||
|
| direction |
|
|
|
|
|
| • Mark the positions of the six fastening holes on the roof of the vehicle | ||
| in a circular pattern. | ||
Note: | The size of the holes and the choice of fastening screws to be used | ||
| (not supplied) depend on the type and thickness of the materials | ||
| used in the roof structure. If the roof panelling (plastic roofs) is | ||
| sufficiently strong, it is recommended that tallow drop screws, plain | ||
| washers and | ||
| mounting plate. | ||
14