Kathrein CAP 310, CAP 210 manual BAS 60 planar antenna, Important information for use, Safety notes

Page 25

BAS 60 planar antenna

Proper use

The BAS 60 flat antenna is used to receive digital TV and radio signals in the frequency range from 10.70 to 12.75 GHz.

It cannot receive terrestrial signals.

The BAS 60 has been designed for mobile use, to receive satellite signals in stationary caravans, motorhomes or trucks.

The antenna’s fastening was attuned to the HDP 171 turntable.

The alignment of the antenna occurs automatically when you switch on the UFD 170 receiver and select the TV programme.

BAS 60 with HDP 171

Important information for use

The following circumstances result in the loss of all warranty and liability claims towards the manufacturer:

Improper installation

Use of non-specified mounting materials, which cannot guarantee the mechanical reliability of the antenna system

Non-permissible use, e.g. use of the planar antenna for storage

Structural changes or interference with the components and mounting accessories in the set, which could endanger both the mechanical and functional reliability

Improper or forcible opening of the components, which can cause malfunctions

Use of cleaners containing solvents, such as acetone, nitro-cellulose combination thinner, naphtha etc.

Failure to observe installation and safety instructions in this manual

Safety notes

Before commencing a journey, the antenna must always be lowered into horizontal position (park position).

If the antenna has collided with fixed or moving objects, you must check that is still securely fitted.

As the antenna is subjected to vibration loads during driving, at regular intervals, depending on the frequency of driving, you should check that the system is still securely fitted and tighten any parts that have come loose.

The maximum permissible speed for vehicles with a BAS 60/ HDP 171 receiver unit mounted on the roof is 130 km/h.

Lower the antenna if it will not be used for a long period. This makes the securing bolts more difficult to access (protection against theft).

25

Image 25
Contents MobiSet 2 digital CAP Mobi Set 3 digital CAP HTV 115 LCD/TFT television set is only included with the CAP Important information about MobiSet 2 digital CAPForeign language installation instructions HDP Components of MobiSet 3 digital CAPUFD HTVProduct package Product packageProper use Installation instructionsProper use Intended purposeSafety during installation work Safety instructions important notesFundamental information Proper installation and safetySealing glue Road Traffic Licensing Regulations StVZOChecks before commencing a journey Power supply, fusingSafety precautions during installation Cleaning the antennaLowering the antenna while driving Safety instructions important notes Selecting the installation location Installation and connectionRequired tools and equipment Unpacking and preparationCables may not be cut, as otherwise the proper functioning Installation of cable duct and mounting plate Installation stepsInstallation and connection Installation and connection Do not step on the connectors or kink the cables Installation of turntableVersion with cable duct below turntable Fig. E Version with external cable duct Fig. F Tightening torque 6 Nm Brief instructions for installing the HDPCommon interface modules should always be accessible Installation of UFDConnecting the UFD 170 to the on-board power network Laying cables and connecting the turntable HDPImportant safety information for CAP Connecting the HTV 115 LCD TV SetFunction information for connection to on-board network Connection example motorhome 12 V battery connection UFD Connection example caravan 230 V battery connection UFD BAS 60 planar antenna Safety notesImportant information for use BAS 60 with HDPReception range/footprint BAS 60 technical dataPolarisation setting Polarisation settingInstallation process On the turntable Motorhome/caravanMiddle standard View after installation +15Electronic Service Chiemgau GmbH Bahnhofstrasse Address of the service centreDismantling for servicing DismantlingDimensions mm Technical dataElectric data Sikaflex 291 data sheet Sikaflex 291 technical data sheet Declaration of conformity