Polarisation setting
Safety notes
We strongly advise that users who are not familiar with the installation work should not reassemble the BAS 60 independently. They should contact a technician or engineer. They may find a suitable person on the campsite.
Make sure that:
-The antenna and connected units are disconnected from the power
-The person carrying out the installation does not suffer from vertigo and can move around safely on the roof of the caravan or motorhome
-The person carrying out the repairs is wearing sturdy and
-The person carrying out the repairs has a secure position to stand and hold on while working
-The roof and the climbing equipment used (e.g. ladder) are dry, clean and
-The roof can withstand the weight of the person carrying out the repairs
Attention! Risk of death or injury due to falling or roof collapse!
-No persons, especially small children, should be in the immediate area of the turntable and touch movable parts during dismantling/installation of the planar antenna. Nobody should be below the antenna inside the caravan/motorhome during dismantling/installation.
Attention! Risk of death or injury due to possible roof collapse and falling parts on the motorhome/caravan.
Continue to heed the “safety instructions - important notes“ section!
No impediments may be in the turning range (see “safety information - important notes”)!
Installation process
The explanation of this installation process is based on the assumption that the entire CAP unit has been properly put together, installed and set up, as described in this installation manual. The safety instructions in the detailed operating manual for the UFD 170 must also be followed!
28