Kathrein Explore the Comprehensive Guide to BAS 60 Satellite TV System Installation

Page 5

Product package

Product package

•Turntable with ﬁtted BAS 60 and ready for connection cables with a length of 3.5 m

•Power supply cable (10 m) for connection to on-board network

•Mounting plate

•Roof duct with sealing gasket

•Sikaﬂex® 291 sealing glue (100 ml tube)

•UFD 170 satellite combi receiver with connecting cables, infra-red sensor and infra-red remote control

•HTV 115 LCD/TFT television set with connecting cables and operating manual

•MobiSet 3 digital CAP 310 installation manual

•UFD 170 satellite combi receiver and HDP 171 turntable operating manual

5

Image 5

Contents MobiSet 2 digital CAP Mobi Set 3 digital CAP HTV 115 LCD/TFT television set is only included with the CAP Important information about MobiSet 2 digital CAPForeign language installation instructions HDP Components of MobiSet 3 digital CAPUFD HTVProduct package Product packageProper use Installation instructionsProper use Intended purposeSafety during installation work Safety instructions important notesFundamental information Proper installation and safetySealing glue Road Trafﬁc Licensing Regulations StVZOChecks before commencing a journey Power supply, fusingLowering the antenna while driving Cleaning the antennaSafety precautions during installation Safety instructions important notes Selecting the installation location Installation and connectionRequired tools and equipment Unpacking and preparationCables may not be cut, as otherwise the proper functioning Installation of cable duct and mounting plate Installation stepsInstallation and connection Installation and connection Version with cable duct below turntable Fig. E Installation of turntableDo not step on the connectors or kink the cables Version with external cable duct Fig. F Tightening torque 6 Nm Brief instructions for installing the HDPCommon interface modules should always be accessible Installation of UFDConnecting the UFD 170 to the on-board power network Laying cables and connecting the turntable HDPFunction information for connection to on-board network Connecting the HTV 115 LCD TV SetImportant safety information for CAP Connection example motorhome 12 V battery connection UFD Connection example caravan 230 V battery connection UFD BAS 60 planar antenna Safety notesImportant information for use BAS 60 with HDPReception range/footprint BAS 60 technical dataPolarisation setting Polarisation settingInstallation process On the turntable Motorhome/caravanMiddle standard View after installation +15Electronic Service Chiemgau GmbH Bahnhofstrasse Address of the service centreDismantling for servicing DismantlingDimensions mm Technical dataElectric data Sikaﬂex 291 data sheet Sikaﬂex 291 technical data sheet Declaration of conformity