Kathrein MobiSet 3 CAP 310, MobiSet 2 CAP 210 manual Electric data

Page 33

Technical data

Electric data

Supply voltage

10.9…13.8 V

Ignition signal

12…24 V

“Standby” current

20 mA

“ENGINE ON” current

5...8 A

Transient start-up current

12 A

Azimuth rotation range

0…370°

Elevation rotation range

10…90°

Search time for first satellite

(typ.) 10…120 s

Search time for additional satellites

(typ.) 2…30 s

LSM start-up time

2…15 s

33

Image 33
Contents MobiSet 2 digital CAP Mobi Set 3 digital CAP HTV 115 LCD/TFT television set is only included with the CAP Important information about MobiSet 2 digital CAPForeign language installation instructions HDP Components of MobiSet 3 digital CAPUFD HTVProduct package Product packageProper use Installation instructionsProper use Intended purposeSafety during installation work Safety instructions important notesFundamental information Proper installation and safetySealing glue Road Traffic Licensing Regulations StVZOChecks before commencing a journey Power supply, fusingCleaning the antenna Safety precautions during installationLowering the antenna while driving Safety instructions important notes Selecting the installation location Installation and connectionRequired tools and equipment Unpacking and preparationCables may not be cut, as otherwise the proper functioning Installation of cable duct and mounting plate Installation stepsInstallation and connection Installation and connection Installation of turntable Do not step on the connectors or kink the cablesVersion with cable duct below turntable Fig. E Version with external cable duct Fig. F Tightening torque 6 Nm Brief instructions for installing the HDPCommon interface modules should always be accessible Installation of UFDConnecting the UFD 170 to the on-board power network Laying cables and connecting the turntable HDPConnecting the HTV 115 LCD TV Set Important safety information for CAPFunction information for connection to on-board network Connection example motorhome 12 V battery connection UFD Connection example caravan 230 V battery connection UFD BAS 60 planar antenna Safety notesImportant information for use BAS 60 with HDPReception range/footprint BAS 60 technical dataPolarisation setting Polarisation settingInstallation process On the turntable Motorhome/caravanMiddle standard View after installation +15Electronic Service Chiemgau GmbH Bahnhofstrasse Address of the service centreDismantling for servicing DismantlingDimensions mm Technical dataElectric data Sikaflex 291 data sheet Sikaflex 291 technical data sheet Declaration of conformity