Kathrein CAP 210, CAP 310 Safety instructions important notes, Safety during installation work

Page 7

Safety instructions - important notes

Safety during installation work

When carrying out installation work in locations with a risk of falling, take appropriate safety precautions, e.g. use of a working platform. Make sure that the vehicle roof is sufficiently strong and stable to carry out the installation work (risk of damage or collapse of roof).

In case of doubt, contact a qualified specialist dealer or the manufacturer of your vehicle to find an appropriate installation location.

Make sure that:

-The antenna and connected units are disconnected from the power

-The person carrying out the installation does not suffer from vertigo and can move around safely on the roof of the caravan or motorhome

-The person carrying out the repairs is wearing sturdy and non-slip shoes

-The person carrying out the repairs has a secure position to stand and hold on while working

-The roof and the climbing equipment used (e.g. ladder) are dry, clean and non-slip

-The roof can withstand the weight of the person carrying out the repairs

Attention! Risk of death or injury due to falling or roof collapse!

-Nobody should be below the antenna inside the caravan/motorhome during dismantling / installation.

Attention! Risk of death or injury due to possible roof collapse and falling parts!

7

Image 7
Contents MobiSet 2 digital CAP Mobi Set 3 digital CAP HTV 115 LCD/TFT television set is only included with the CAP Important information about MobiSet 2 digital CAPForeign language installation instructions HTV Components of MobiSet 3 digital CAPHDP UFDProduct package Product packageIntended purpose Installation instructionsProper use Proper useSafety during installation work Safety instructions important notesRoad Traffic Licensing Regulations StVZO Proper installation and safetyFundamental information Sealing glueChecks before commencing a journey Power supply, fusingSafety precautions during installation Cleaning the antennaLowering the antenna while driving Safety instructions important notes Unpacking and preparation Installation and connectionSelecting the installation location Required tools and equipmentCables may not be cut, as otherwise the proper functioning Installation of cable duct and mounting plate Installation stepsInstallation and connection Installation and connection Do not step on the connectors or kink the cables Installation of turntableVersion with cable duct below turntable Fig. E Version with external cable duct Fig. F Tightening torque 6 Nm Brief instructions for installing the HDPCommon interface modules should always be accessible Installation of UFDConnecting the UFD 170 to the on-board power network Laying cables and connecting the turntable HDPImportant safety information for CAP Connecting the HTV 115 LCD TV SetFunction information for connection to on-board network Connection example motorhome 12 V battery connection UFD Connection example caravan 230 V battery connection UFD BAS 60 with HDP Safety notesBAS 60 planar antenna Important information for useReception range/footprint BAS 60 technical dataPolarisation setting Polarisation settingInstallation process On the turntable Motorhome/caravanMiddle standard View after installation +15Dismantling Address of the service centreElectronic Service Chiemgau GmbH Bahnhofstrasse Dismantling for servicingDimensions mm Technical dataElectric data Sikaflex 291 data sheet Sikaflex 291 technical data sheet Declaration of conformity