SUPERSERVER 6012L-6 Manual
lRackmount hardware (with screws): Two (2) rack rail assemblies
Six (6) brackets for mounting the rack rails to a rack/telco rack
lOne (1) CD-ROM containing drivers and utilities: Intel LANDesk Client Manager
ATI Rage XL 8MB PCI graphics controller driver LAN driver
SCSI driver
lSuperServer 6012L-6 User's Manual
*Type and number depends upon the configuration ordered.
1-2 Server Chassis Features
The SC812-EO is Supermicro's second-generation 1U chassis and features three hard drive bays, two front side USB ports and a revolutionary cooling design that can keep today's most powerful processors running well below their temperature thresholds. The following is a general outline of the main features of the SC812-EO chassis.
System Power
When configured as a SuperServer 6012L-6, the SC812-EO chassis in- cludes a 400W cold-swap power supply.
SCSI Subsystem
The SCSI subsystem supports three 80-pin SCA Ultra160 SCSI hard drives. (Any standard 1" drives are supported. SCA = Single Connection Attach- ment.) The SCSI drives are connected to an SCA backplane that provides power, bus termination and configuration settings. The SCSI drives are also hot-swap units.
Control Panel
The SC812-EO control panel provides important system monitoring and con- trol information. LEDs indicate power on, network activity, hard disk drive activity and system overheat conditions. Also present are a main