SUPER MICRO Computer 6012L-6 user manual Preface, About This Manual, Manual Organization

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC techni- cians. It provides information for the installation and use of the Super- Server 6012L-6. Installation and maintainance should be performed by ex- perienced technicians only.

The SuperServer 6012L-6 is a high-end, dual Intel Xeon processor 1U rackmount server based on the SC812-EO 1U rackmount server chassis and the P4DLR+ motherboard, which supports single or dual Xeon 512K L2 cache processors of up to 2.4+ GHz at a Front Side (system) Bus speed of 400 MHz and up to 8 GB of PC1600 DDR SDRAM memory.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the server system and describes the main features of the SUPER P4DLR+ mainboard and the SC812-EO chassis, which make up the SuperServer 6012L-6.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6012L-6 into a rack and check out the server configuration prior to power- ing up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system.

iii