Sony MAV-555SS operation manual 30 E 3-4 Setup

Chapter 3 Preparations

Expansion menu items (Continued)

Item number	Display indication	Settings	Description
225	GPI CONFIG MODE	Setting determines whether the GPI I/O PIN is a fixed function or can be set.
BI
	SUB MENU
	GPI CONFIGURE MODE	Setting determines whether the GPI I/O PIN is a fixed function or can be set.
		If it can be set, the GPI INPUT CONFIGURATION (menu 223) and GPI INPUT
		CONFIGURATION (menu 224) settings are effective.
		preset	: Used as a fixed function.
		config	: Allows setting.
		When set as fixed function, the following functions are assigned.

			PIN	I/O	FF
			1	i	R1 Rec
			2	i	R1 Stop
			3	i	P1 Play
			4	i	P1 Stop
			5	i	R2 Rec
			6	i	R2 Stop
			7	i	R2 Rec Close (BVE mode only)
			8	i	P2 Play
			18	i	P2 Stop
			9	o	R1 REC Status
			10	o	R1 Stop Status
			11	o	P1 Play Status
			12	o	P1 Stop Status
			13	o	R2 Rec Status
			14	o	R2 Stop Status
			16	o	P2 Play Status
			26	o	P2 Stop Status
	INPUT FUNCTION	Collects and halts GPI input functions.
		enable		: GPI input terminals operate.
		disable		: GPI input terminals do not operate.
	OUTPUT FUNCTION	Collects and halts GPI output functions.
		enable		: GPI output terminals operate.
		disable		: GPI output terminals do not operate.
299	RS422 INHIBIT on LOCAL	When the LOCAL MODE is set with the REMOTE button on the front panel, makes the
BI	MODE	settings relative to the 9-pin connectors.
	SUB MENU
	DISK PROTOCOL	Specifies whether DISK PROTOCOL is accepted when the mode is set to LOCAL.
		off		: Accepted in LOCAL MODE.
		on		: Rejected in LOCAL MODE.
	PRESET COMMAND	Specifies whether the VTR Protocol 4x: Preset type command from the RS422 is
		effective and whether it is possible to switch between REMOTE and LOCAL with the
		RS422 when the mode is set to LOCAL.
		on		: Ineffective in LOCAL MODE.
		off		: Effective in LOCAL MODE.

3-30 (E) 3-4 Setup