Sony MAV-555SS operation manual Expansion Menu Operation, System Time Settings

3-4-4 Expansion Menu Operation

You can use the same setting operation in the Expansion menu as in the Basic menu.

For details of operation in the Basic menu, see Section 3-4-2, “Basic Menu Operation” (page 3-23).

Note

To access the Expansion menu requires the EM-3 board to be installed.

For details, refer to the Installation Manual.

3-4-5 System Time Settings

Set the system date and time as follows.

Note

If any input is present at the TIME CODE IN (SYSTEM) (page 2-9) connector on the connector panel, that input takes priority and the system time cannot be set as described below.

Display panel

				COMPOSITE	SDI
		R1	P1	VIDEO	REMOTE
METER	CONTROL			INPUT
PANEL	PANEL	PORT SELECT			PROCESS
525 625	SETUP BANK	R2/	P2		CONTROL VIDEO
		P3

	1	2	3		AUDIO INPUT / MONITOR SELECT				CHROMA
SYSTEM			HDD	INPUT	CH1	CH2	CH3	CH4	REMOTE
					SDI
									SET UP/BLACK
		HELP			AES/EBU				MENU
				MONITOR
					L				LOCAL CHROMA/PHASE
	TOTAL /		FULL /		ANALOG
PHONES	REMAIN		TIME		R

	CH1	CH2	CH3	CH4	VIDEO/MENU
TC/UB TC TYPE	PRESET	PRESET	PRESET	PRESET	PRESET

0 10

MENU SET

1,32

1 Simultaneously press the TIMER SEL and SET buttons for two seconds or longer.

The current date and time settings appear in the upper time data display area on the display panel.

D A T E ( D M Y ) :		1 7 / 0 8 /	2 0 0 1
T I M E ( H M )	:	1 3 : 4 0

Date appears in the order day (D), month (M), and year (Y), and time appears as hour (H):minute (M).

2 Using the MENU knob, set each of the items day, month, year, hour, and minute in that order.

•By turning the MENU knob, you can change the setting of the currently flashing item.

•By pressing the MENU knob, you can move the flashing cursor to the next item.

•When you want to move the flashing cursor to the previous item, press the VIDEO button.

3 To set the changed date and time settings, press the SET button.

To cancel the changes, press the MENU button instead of the SET button

Note

If you press the SET button while an invalid date is displayed, that setting will not be set. Repeat the above process.

Chapter 3 Preparations

3-4 Setup 3-41 (E)