Sony MAV-555SS RAID Com. Error, RAID Error, Fan1 Trouble, Fan2 Trouble, Fan3 Trouble

Page 88

Appendixes

RAID Com. Error

Meaning: Detected a malfunction in communications between the RAID control display and the FM- 81 Board.

The PU-121 Board or FM-81 Board may be defective.

RAID Error

Meaning: Detected malfunctions in two or more HDDs making up the RAID.

Recording and playback do not run correctly. By pressing HELP, you can view the numbers of HDDs displaying warnings.

Warning

Fan1 Trouble

Meaning: Detected a malfunction in the left fan unit (as

viewed when facing the rear panel). The fan unit may be defective.

Fan2 Trouble

Meaning: Detected a malfunction in the central fan unit (as viewed when facing the rear panel).

The fan unit may be defective.

Fan3 Trouble

Meaning: Detected a malfunction in the right fan unit (as viewed when facing the rear panel).

The fan unit may be defective.

Ref. Missing

Meaning: Reference signal is not input.

Remedy: Input the reference signal.

Ref. Not Lock

Meaning: Cannot synchronize with the reference signal. The reference signal or FM-81 Board may be defective.

Remedy: Confirm that the reference signal and “525/625” (menu 010) settings on the base menu are correct. If they are correct, the FM-81 Board may be defective.

DM1 File Open Fail

Meaning: Upon startup, failed to allocate space for the LIVE1 material (in SS mode, LIVE_SS) for R1 and P1 ports in DTR+PANEL or DTR+DTR mode. R1 and P1 ports cannot be controlled from the DTR-3000. A recording time exceeding recording capacity may be set for LIVE DURATION (menu 034) on the basic menu.

Remedy: Press the TOTAL/REMAIN button and confirm the settings for SysRemain (HDD available space) and “LIVE DURATION” (menu 034) on the basic menu. When the operation mode is DTR+Panel, this warning occurs if the “LIVE DURATION” setting for DTR-1 exceeds

SysRemain. When the operation mode is DTR+DTR, this warning occurs if the LIVE DURATION settings for DTR-1 plus DTR-2 plus three minutes exceeds SysRemain. Correct the LIVE DURATION settings, then reboot the unit.

DM2 File Open Fail

Meaning: Upon startup, failed to allocate space for the LIVE2 material for R2 and P2 ports in DTR + DTR mode. R2 and P2 ports cannot be controlled from the DTR-3000. A recording time exceeding recording capacity may have been set for LIVE DURATION (menu 034) on the basic menu.

Remedy: See “DM1 File Open Fail.”

EM Board Warning

Meaning: Detected a malfunction on the EM-3 Board. The EM-3 Board may be defective.

FM Board Warning

Meaning: Detected a malfunction on the FM-81 Board. The FM-81 Board may be defective.

FM Battery Warning

Meaning: Detected a malfunction in the battery that maintains settings on the FM-81 Board. The battery may be discharged.

R1 port Warning

Meaning: Detected a malfunction in the R1 port control area.

The DM-127 Board and DPR-189(A) Board may be defective.

R2 port Warning

Meaning: Detected a malfunction in the R2 port control area.

The DM-127 Board and DPR-189 (B) Board may be defective.

R3 port Warning

Meaning: Detected a malfunction in the R3 port control area.

The DM-127 Board and DPR-189 (B) Board may be defective.

P1 port Warning

Meaning: Detected a malfunction in the P1 port control area.

The DM-127 Board and DPR-189 (A) Board may be defective.

P2 port Warning

Meaning: Detected a malfunction in the P2 port control area.

The DM-127 Board and DPR-189 (B) Board may be defective.

A-2 (E) Error Messages

Page 87 Page 89
Image 88
Page 87 Page 89
Contents MAV-555SSVer Avertissement For the customers in the USA For the customers in EuropePour les clients européens Für Kunden in EuropaTable of Contents Purpose and intended audience for this manual Organization of this manualUsing this manual Descriptions of operating proceduresMaintenance Manual Option Installation Manual suppliedRelated manuals Page SS mode only FeaturesMAV-555SS Overview Common to SS and SD modes SD mode only Changes from Ver Optional AccessoriesChanges from Ver .00 to Ver Editing Fader Panel BKNE-1011 E 1-4 Optional Accessories Names and Functions of Parts Front PanelMeter Panel Port SelectTimer SEL time data display select button ERROR/WARNING indicators System indicatorHDD indicator LED indicators Operating panel indicatorsDisplay indicators panel IndicatorsTime data indication Status indicationPB/REC indicators Video Process setting sectionSetup LEVEL/BLACK Level button Chroma Phase buttonBlank Panel System Setup PanelRemote button Power switch Control Panel connectorControl Panel switch SET UP Select switchConnector Panel SDI OUT connectorsVideo in Composite connectors BNC type Video OUT Composite connectors BNC typeAudio in AES/EBU Digital Audio Input connectors BNC type Audio OUT AES/EBU connectors BNC typeSDI Super connector Analog Composite Super connectorDSK in connectors Sdti CP connectorsAnalog Audio Expansion Box BKMA-570 Page Motion modes Two modes MAV-555SS ModesOperation modes Four modes Panel Mode SS Mode Sony Super Motion ModeSD Mode Standard Motion mode VTRSS Mode DTR + Panel ModeSD Mode MAV-555SS Modes 3-5 E DTR + DTR Mode SD mode only BVE Mode SD mode only MAV-555SSEditing Panel Monitor Ntsc BLOCK-1 Connecting External Devices Connections with the Panel ModeConnecting to digital devices SS mode 10 EConnecting to digital devices SD mode OUTConnecting to analog devices SD mode Analog Audio OUTConnecting with the DTR+Panel mode SS mode Connections with the DTR + Panel Mode13 E Connecting with the DTR+Panel mode SD mode Sync Generator Dynamic Motion Controller DTR-3000Connections with the DTR + DTR Mode 15 EBVE Mode Connections External Synchronization of Output Video Signals Setup Basic Menu Settings18 E 3-4 Setup How to Read the TablesLocal Function Enable Drop Frame Mode withPreroll Time Character H-POSITION20 E 3-4 Setup Port Configuration DTR CUE List ClearLive Duration DTR-1 Loop REC22 E 3-4 Setup Basic Menu Operation To cancel setting changesModes of operating the Menu control Menus including a setting submenu 24 E 3-4 SetupMenu items with submenus Press the Menu knob Contents of the Expansion Menu Load Setup ALL Save Setup ALLLoad Setup Bank Setup Bank28 E 3-4 Setup Configuration GPI OutputPIN 9 . Function PIN 26 . Function30 E 3-4 Setup Audio Fade Mode P1 Audio Fade Mode P2Audio Fade Mode P3 Preset Replace32 E 3-4 Setup SUB Menu Edit Delay Edit Preset CommendFunction Mode After Function Mode After Cueup P334 E 3-4 Setup Setting NON Compress Line R1NON Compress Line R2 F1 Select36 E 3-4 Setup Delay Monitor Video Delay Sync DelayInternal Signal Blanking Width P138 E 3-4 Setup Audio Output Phase P1 Audio Output Phase P2Audio Output Phase P3 Internal Audio Signal40 E 3-4 Setup SS LIP Sync AdjustSS Audio Muting SS Normal Play SpeedSystem Time Settings Expansion Menu OperationSuperimposed Character Information Character adjustmentDisplayed information Additional information displayed in the BVE mode BVE mode display is shown below Switch Settings Preparations for RecordingSelecting the Video Signals Selecting the Audio SignalsSelecting the video signals to be monitored Selecting the audio signals to be monitoredAdjusting Recording Levels To adjust the recording levelUsing the emphasis function Recording Analog AudioPreparations for Playback DisplayedSelecting the Playback Port to be Controlled Selecting the Displayed Time DataTo display time data To display user bitsTo adjust the playback level manually Adjusting Playback Audio LevelsRemotely Controlling Video Processor Changing the Motion Mode Basic Operation with SS ModeMotion Modes Changing the Operation Mode Basic Operation with Panel ModeRecording Operation Playback OperationEE Signal Selection Initial Setup for DTR+Panel and DTR+DTR ModesSetting the Recording Time from the DTR Basic Operations with DTR+Panel and DTR+DTR ModesBasic Operations DTR+Panel and DTR+DTR Modes Port Configuration Basic Operations in BVE ModeBasic Operation of the RP Port When performing the operation through the MAVE-F555 Loading a New File for Editing in the RP PortLinear Editing through the RP Port Manual Recording through the RP PortBasic Operation of the R2 Port Basic Operation of the P2 and P3 PortsCollecting through the R2 Port Replacing Files through the R2 PortWhen the R1 key was pressed New File NamesMonitoring the RP Port Playback through the P2 and P3 PortsFile Backup Function Editing-Related Error MessagesWhen the P1 key was pressed Pre-roll Time10 E 5-5 Basic Operations in BVE Mode Error Messages ErrorRAID Com. Error RAID ErrorFM Battery Warning Fan1 TroubleRAID Battery Warning HDD xx SPC ErrorEM Mixer Config Fail Temperature RiseSpecifications GeneralOperation Digital video systemProcessor adjustment ranges Input connectorsOutput connectors Video systemRemote connectors Supplied accessoriesOptional accessories Memory Card sold separatelyPage Sony Corporation
Top Page Image Contents