Sony MAV-555SS MAVE-F555 EXT VTR, Control, SUB Menu Edit Delay, Edit Preset Commend, UB Byte

Expansion menu items (Continued)

Item number	Display indication	Settings		Description
325	MAVE-F555 EXT VTR	Specifies edit parameters when an external VTR is selected as the Recorder in the BVE
BI	CONTROL	mode.
	SUB MENU
	EDIT DELAY	Specifies EDIT DELAY of the external VTR
		0 .. 9 frame
	EDIT PRESET COMMEND	Specifies whether Audio Analog Channel 2 is used or Digital Audio Channel 4 is used in
		the EDIT PRESET command.
		Digital		: Digital Audio Channel 4 is used.
		Analog		: Analog Audio Channel 2 is used and Audio Channel 3 or 4 selections are
				ignored.
	UB BYTE 1	Specifies the value of the user bit to specify the VTR during editing.
	UB BYTE 2	00 to FF
	UB BYTE 3
	UB BYTE 4
349	REFERENCE SELECT R1	Selects the reference signal for the recorder port.
350	REFERENCE SELECT R2	output ref		: Selects the output signal as the reference.
351	REFERENCE SELECT R3	Input video		: Selects the input signal as the reference.
BI		Notes: • Changes in settings do not become effective until any file on the recorder
				port is unloaded.
				• In SS mode, set to output ref.
352	REC INHIBIT R1	These items prohibit port recording.
353	REC INHIBIT R2	REC INHIBIT off			: REC INHIBIT OFF (recording enabled)
354	REC INHIBIT R3	REC INHIBIT on			: REC INHIBIT ON (recording prohibited)
BI
401	FUNCTION MODE AFTER	These items select the mode to be in effect for the MAV-555SS after the cue-up
	CUEUP P1	operation is completed.
402	FUNCTION MODE AFTER	stop		: Set stop mode.
	CUEUP P2	still		: Set still mode (search mode).
403	FUNCTION MODE AFTER
BI	CUEUP P3
404	VIDEO OUTPUT AFTER	These items specify whether to output the last picture or use “BLACK MUTING” after a
	UNLOAD P1	file is closed.
405	VIDEO OUTPUT AFTER	black		: Black Muting.
	UNLOAD P2	pb		: Output the last picture.
406	VIDEO OUTPUT AFTER
BI	UNLOAD P3
630	ID CODE R1	Sets the ID CODE.
631	ID CODE R2
632	ID CODE R3
	SUB MENU
	BYTE 0		.. 0×FF
		0×00
	BYTE 1
	BYTE 2
	BYTE 3
633	TCG MODE R1	Sets the Time Code Generator.
634	TCG MODE R2
635	TCG MODE R3
BI
	SUBMENU
	ID CODE PRESET	Sets whether the ID CODE is registered.
		USER BIT		: Registers the USER BIT without registering the ID CODE.
		ID CODE		: Registers the ID CODE.
	REGEN MODE	Selects the regenerate signal when the Time Code Generator is in the regenerate mode.
		TC		: Only TC is regenerated.
		UB		: Only UB is regenerated.
		TC & UB		: Regenerates TC and UB.
	REGEN / PRESET	Sets whether Time Code Generator regenerates.
		REGEN		: Regenerates the time code.
		PRESET		: Does not regenerate the time code.

Chapter 3 Preparations

3-4 Setup 3-33 (E)