Sony MAV-555SS operation manual 32 E 3-4 Setup

			Expansion menu items (Continued)
	Item number	Display indication			Settings		Description
	321	LINEAR EDIT NEW FILE			Sets the BLACK/MUTING total file length in hours and minutes for the editing base in
	BI	LENGTH			the BVE mode.
					Note:		The BLACK/MUTING file is created with the New Material command on
							the BKMA-505 control panel, or by pressing the NEW FILE key on the
		SUB MENU
							editing panel of the MAVE-F555.
		LENGTH HOUR			Sets hour units for total length.
				0 .. 3
		LENGTH MIN			Sets minute units for total length.
				0 .. 30 .. 59
		SHOW TC HOUR			Specifles the New file Show point time code. The time code at the head of the file is set
					15 sec. before the Show point time code.
		SHOW TC MIN
					If no time code exists as with NTSC drop frames or PAL frames 25 to 29, then the
		SHOW TC SEC			nearest time code before the specified time code is used.
					HOUR		: 00 .. 23
		SHOW TC FRAME
Chapter3					MIN		: 00 .. 59
					SEC		:	00	.. 59
					FRAME		:	00	.. 29
Preparations	323	LINEAR EDIT MESSAGE			Sets the text information to be displayed in the BVE mode: current monitor port, file
		FADE TIME			This item specifies how many seconds that changes in the display information will be
	BI	SUB MENU			number, and file name.
		V POSITION			Sets the vertical position of the text information (0 .. 1 .. 11)
					displayed before automatically disappearing.
					Infinite		: Always display.
					1sec		: Display for 1 second.
					2sec		: Display for 2 second.
					3sec		: Display for 3 second.
					5sec		: Display for 5 second.
					10sec		: Display for 10 second.
					15sec		: Display for 15 second.
					30sec		: Display for 30 second.
					1min		: Display for 1 minute.
		TYPE			Sets the text information display.
					norm		: Each type of information is displayed according to the operation.
					full		: Detailed information is normally displayed.
					none		: No information is displayed
	324	MAVE-F555 PORT			This item specifies the port that is assigned to the port selection keys ([P1], [P2]) in the
	BI				F555 when the MAVE-F555 is connected to the MAV-555SS.
					For details, refer to section 3-4, “Recorder Selection Function,” in the MAVE-F555
		SUB MENU
					operation manual.
		R SEL-VTR P1 KEY			This item assigns the port in the MAV-555SS that is selected by the [P1] and [P2] keys in
					the F555 when the [VTR] key in the F555 is selected. Futher, the [R] key is set to VTR.
		R SEL-VTR P2 KEY
					none		: No assignment to an MAV-555SS port.
					R1P1		: Assignment to the RP port in BVE mode.
					P2		: Assignment to the P2 port in BVE mode.
					P2 ,	R1P1
		R SEL-MAV P1 KEY			This item assigns the port in the MAV-555SS that is selected by the [R], [P1], and [P2] keys
					in the F555 when the [MAV] key in the F555 is selected. Futher, the [R] key is set to R1P1.
		R SEL-MAV P2 KEY
					none		: No assignment to an MAV-555SS port.
					R1P1		: Assignment to the RP port in BVE mode.
					P2		: Assignment to the P2 port in BVE mode.
					EXT		: Assignment to an external VTR.
					P2 ,	none
				It is also possible to assign different keys to the same ports. For details, refer to the
				MAVE-F555 Operation Manual.
		BG PORT			Specifies whether the background port (R2/P3) is used.
					enable		: Operations such as REC or STOP on the R2 port, or LOAD, PLAY, STOP on
								the P3 port from the MAVE-F555 are permitted.
					disable		: Operations such as REC or STOP on the R2 port, or LOAD, PLAY, STOP on
								the P3 port from the MAVE-F555 are prohibited.

3-32 (E) 3-4 Setup