Sony MAV-555SS Shuttle Muting, Audio Monitor Muting, Audio Output Mixing, Audio Output Channel P1

Expansion menu items (Continued)

Item number	Display indication	Settings			Description
806	SHUTTLE MUTING	This item specifies audio muting during shuttle operations.
BI		off			: Audio is always output.
		on			: Muting is always applied.
809	AUDIO MONITOR MUTING	This item specifies the muting of the audio output from the audio monitor.
		normal			: Outputs audio normally.
		muting			: Mutes the audio output.
820	AUDIO OUTPUT MIXING	This item specifies the mixing method when mixing the audio output by the PB ports.
BI		add			: Simple addition
		average			: Average
		rms			: Root mean square
821	AUDIO OUTPUT CHANNEL P1	These items make the settings for substituting, mixing and outputting the audio
822	AUDIO OUTPUT CHANNEL P2	output by the PB ports on each channel.
823	AUDIO OUTPUT CHANNEL P3
BI
	SUB MENU
	CHANNEL 1	Select from among none, 1 , 2, 12, 3, 13, 23, 123, 4, 14, 24, 124, 34, 134, 234, and
		1234. The displayed channels are mixed and output.
	CHANNEL 2	Select from among none, 1, 2 , 12, 3, 13, 23, 123, 4, 14, 24, 124, 34, 134, 234, and
		1234. The displayed channels are mixed and output.
	CHANNEL 3	Select from among none, 1, 2, 12, 3 , 13, 23, 123, 4, 14, 24, 124, 34, 134, 234, and
		1234. The displayed channels are mixed and output.
	CHANNEL 4	Select from among none, 1, 2, 12, 3, 13, 23, 123, 4 , 14, 24, 124, 34, 134, 234, and
		1234. The displayed channels are mixed and output.
824	AUDIO EDIT PREVIEW	Sets the output phase of the Audio playback signal for the Edit Preset Status.
BI	SWITCHER	internal				: Matches the output phase during EE. Set when previewing the
						MAV-555SS or while monitoring the VTR output signal.
		external switcher : Matches the internal or external video code. Set when switching the
						signal with the external switcher and Previewing.
827	AUDIO OUTPUT PHASE P1	Sets the output timing of the audio playback signal (SIF, AES/EBU only). With 0x100 as
828	AUDIO OUTPUT PHASE P2	the reference, as it becomes smaller, the output timing comes earlier, and as it becomes
829	AUDIO OUTPUT PHASE P3	larger, the output timing comes later.
BI		0×000 ..		0×100		.. 0×1ff
880	INTERNAL AUDIO SIGNAL	Selects the device to generate the internal audio test signal.
	GENERATOR R1	off			: No audio test signal is generated.
881	INTERNAL AUDIO SIGNAL	silence			: Silent signal.
	GENERATOR R2	1 KHz sine : Generates a sine wave of 1KHz - 20dB FS.
882	INTERNAL AUDIO SIGNAL	1 KHz-9 dB : Generates a sine wave of 1KHz - 9dB FS.
BI	GENERATOR R2	When not off
		For any selection other than “off”, press the INPUT SELECT button on the front panel to
		switch the button on, and then press and hold down the CH1 AUDIO INPUT button for 3
		sec. or more to switch all of the digital audio input signals for all channels to the internal
		audio SG.
883	EMPHASIS ON/OFF R1	When the BKMA-513 optional board is installed, these items enable and disable pre-
884	EMPHASIS ON/OFF R2	emphasis for each individual port.
BI		on
		off
886	RATE CONVERTER R1	Specifies whether an audio AES/EBU rate converter is used.
887	RATE CONVERTER R2	enable			: Uses a rate converter.
888	RATE CONVERTER R3	disable			: Does not use a rate converter.
BI
950	SS CAMERA SELECT	Sets the input video format from cameras that support Super Slow.
B		sony			: Records video signals from standard format Sony cameras.
		other			: Records video signals from cameras other than standard format Sony
					cameras.
951	SS AUDIO INPUT DELAY	Sets the timing of the input audio signal with Super Slow recording.
BI	ADJUST	000 ..	100		.. 1FF
		Note:			If you set SS LIP SYNC ADJUST (menu 953) to on, be sure to adjust this
					setting.

Chapter 3 Preparations

3-4 Setup 3-39 (E)