Atmel STK594 manual Using System Designer

Using System Designer

Figure 4-5.New Project Wizard Window - Step 3 of 6

5.Select AT94K40AL-25DQCfrom the parts list as this is the part found on the STK594 development board, and press Next. The software tool flow window opens, see Figure 4-6.

Figure 4-6.New Project Wizard Window - Step 4 of 6

6.Select either Mentor - VHDL or Mentor - Verilog as the Tool Flow and press Next. The add parts window opens, see Figure 4-7. For this tutorial, the instructions will assume Mentor - Verilog has been selected.

4-4

FPSLIC STK594 User Guide

2819A–FPSLI–07/02