Atmel STK594 manual Bitstream Generation

Using System Designer

4.9Bitstream Generation

The Bitstream Generator takes the outputs from both the FPGA and AVR compilers, and generates a single programming file for use in configuring the AT94K device.

1.Press Bitstream Generation to open the bitstream utility. The FPSLIC Control Register Settings dialog opens, see Figure 4-16.

Figure 4-16.FPSLIC Control Register Settings Dialog

2.Check the Include FPGA Bitstream box and select COUNTER.BST by pressing Browse.

3.Check the Include AVR Hex File box and select STK594.HEX by pressing Browse.

4.Select the Control Register Settings tab and use the default settings, see Figure 4-17.

FPSLIC STK594 User Guide

4-11

2819A–FPSLI–07/02