Section Installing System Designer, Requirements

Section 3 Installing System Designer

		System Designer is the ideal software platform for all AT94K FPSLIC development. It
		includes an Editor, an Assembler and a Debugger as its development tools for the
		embedded AVR development, and also includes a Simulator, Synthesizer and a Place
		and Route tool for FPGA development. System Designer also includes a Co-Verification
		suite powered by Mentor Graphics®, allowing for step-by-step simulation of the FPGA
		and AVR design concurrently.

3.1	System	For a single-user system, System Designer requires a personal computer equipped as
	Requirements	follows:

CD-ROM Drive

250-Mbyte Minimum Hard Drive

128-Mbyte RAM

Parallel Interface Port

Windows® 95/98/2000/Me, or WindowsNT® 4.0 nNetwork Interface Card or Security Dongle

The software security dongle is used to generate a unique HOSTID for systems without a network interface card. The security dongle is connected to the PC through the parallel port interface. It is possible to configure a floating network license through the security dongle. The security dongle allows users to use the software dongle on different machines by removing and placing the dongle on other machines.

FPSLIC STK594 User Guide

3-1

Rev. 2819A–FPSLI–07/02