Installing System Designer
3.4.2Configuring the System Designer License
1.Once you have received your System Designer license from Atmel, place the file in the C:\SystemDesigner directory.
2.Launch the Mentor Graphics License Configuration Utility from Start > Programs > Atmel > Mentor Graphics Licensing > Configure Licensing.
3.Follow the
4.Define the Product License Location and press Next. Use the full path and file- name when defining the license location, for example C:\SystemDesigner\fpslic.dat. If you used a different path and/or file- name, make the necessary changes.
Note: If you are using Windows 95/98/Me it is necessary to reboot the machine prior to running the System Designer software.
3.4.3Testing the System Once you have configured your license, you can test it by invoking the Mentor Graphics
Designer License programs that require a license.
1.Launch ModelSim from Start > Programs > Atmel > ModelTech > ModelSim. If ModelSim launches without any licensing errors, the ModelSim license has been successfully installed.
2.Launch LeonardoSpectrum from Start > Programs > Atmel > Leonardo Spec- trum > Leonardo Spectrum. If LeonardoSpectrum launches without any licensing errors, then the LeonardoSpectrum license has been successfully installed.
3.4.4Troubleshooting You can access the trouble shooting guide from Start > Programs > Atmel > Trouble Shooting Guide.
FPSLIC STK594 User Guide