PLUS Vision M-5 user manual Installing on a Wall, Installation, On the copyboard

Page 10

Installing on a Wall

Parts included in the copyboard package:

Wall mount bar (1 pc), upper brackets (2 pcs),

Marker tray (1 pc, with 2 side covers) and M4 x 8 marker tray installation screws (3 pcs, screws removed when unpacking), lower brackets (2 pcs), M4 x 12 bracket mounting screws (8 pcs)

Parts not included in the copyboard package:

Bolts and nuts for fastening to wall (use commercially available parts – the types differ according to wall surface material). See page 11.

Wall mounting procedure – flow

 

Preparing

Mounting

Mounting

Mounting

Selecting the place the wall surface

the marker tray

the brackets

the copyboard

of installation

Mounting the wall

on the copyboard

on the copyboard

onto the wall

 

 

mount bar

 

 

 

(1)Selecting the place of installation

The wall mount bar should be mounted on columns, posts, or wall which is strong enough to support the weight of the copyboard.

The diagram shows the wall mount bar’s position of installation. The wall mount bar has 8 mm diameter screw holes at 100 mm intervals.

Choose holes in such a way that the center of gravity will be at the middle. (Make sure there is no extreme imbalance.)

The included “wall mount positioning sheet” can be used to easily mark the position of installation.

For concrete walls

Mount commercially available M6 anchor bolts and anchor nuts to the position of installation. (See the following page.)

 

 

 

 

 

 

 

 

 

 

 

 

 

800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100

 

 

 

100

 

 

 

100

 

 

 

100

 

 

 

Position of upper

 

 

 

 

100

 

 

 

100

 

 

 

100

 

 

 

100

bracket (hook)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wall mount bar mounting position

663

300 (275 - 330)

655

Position of lower

bracket

 

For walls with a plywood or plaster board struc- ture

Check that there are columns or studs at the position of installation.

Install using the wall mount bar’s M6 wood screws, etc. (See the following page.)

Mount the lower brackets in the position on the dia- gram shown for the wood screws for when installing the copyboard.

 

Column, stud, etc.

 

 

 

 

800

 

 

 

100

100

100

100

 

Position of upper

100

 

100

100

100

bracket (hook)

 

Wall mount bar mounting position

 

 

 

 

 

663

Notice:

For structures with no columns, use a separately sold stand.

An optional partition mount kit is also available for mount- ing the copyboard on a partition panel.

655

Position of lower bracket

Wooden or thick plywood wall

10

Image 10
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Front and top Names of PartsBack and bottom Installation Assembly Instructions On a wall horizontal or vertical Read This Before InstallingTypes of Installation On a stand horizontal or verticalSelecting the place of installation Installing on a WallInstallation On the copyboardAttach the marker tray to the Copyboard Material of wall Method of installation WoodFix the wall mount bar to the wall surface and posts Concrete U-plugsM412 screws Upper bracket Mount the two crossbars onto the T-shaped Installing on a StandAssembly and installation flow Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Image storing Assembling the stand and mounting the copyboard verticallyAssembling Mounting Changing Brackets Copyboard On the copyboard Onto the standMount the short marker tray Mount the upper and lower brackets using M4 x 12 screwsChange the direction of image data PO- Sition to vertical On the copyboard On the partition hangers Installing on a Partition-PanelAssembly and installation List of parts included in the partition hanger kitMount the copyboard on the partition panel Catch the hooks onto partition panelEditing and printing images Saving and Transferring imagesStoring images on CF memory cards Applications of copyboard dataPower indicator Green When set verticallyPower button Memory indicator AmberInserting CF memory cards Handling CF Memory CardsScanning area Removing the CF memory cardWhen not using the copyboard Connect the AC power adapterPress the Power button to turn on the power Operating the Copyboard Saving sheet images in the built-in memory If the indicator blinks intermittentlySaving the Image on the Sheet Press the Memory button to store that image in the memory Saving sheet images on a CF memory card Insert the CF memory card into the copyboard’s card slotClearing the built-in Memory Vertical/Horizontal Position SettingScrolling the Sheet Storing Image Files on a Computer Connect the USB cableOpen My Computer of the computer Store the copyboard’s image folder onto the computerDisconnect the USB cable Deleting filesWindows 98SE Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Troubleshooting Check the following before asking for repairsSpecifications Start the calibration procedure Clean the sheet surfaceQuick Calibration Software Guide Software Contents and Overview Before Using the SoftwareOperating Environment Setup flow Driver Setup Windows 98SEInstallation preparation Click the M-5 USB DriverUninstall the M-5 driver Uninstalling the Driver Windows 98SEOpen the Device Manager screen and check the installation This completes the setupConnect the Copyboard with the personal computer Check whether the Copyboard is operating properlyWindows Me / 2000 / XP Disconnecting of the CopyboardWindows 98SE Disconnect the USB cable from the personal com- puterClick M-5 Setup Utility Setup UtilityInstallation Starting upAcrobat Reader Installation Click Acrobat ReaderPlus Image Viewer Click Image ViewerDeleting the Software Select Start → Setting→ Control PanelSelect the Remove button of the wizard and click Next 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.