PLUS Vision M-5 Assembling the stand and mounting the copyboard vertically, Image storing

Page 15

Assembling the stand and mounting the copyboard vertically

Parts included in the copyboard package: 6 copyboard mount screws (M4 x 12)

List of parts included in the stand kit (parts used for vertical installation)

Feet (with casters) : 2, Frames : 2, Foot washers : 2, Foot fixing screws (M8 x 50) : 4,

Spring washers : 4, Caps : 6, Fixing knobs (with hexagon cap nuts) : 2, Crossbars : 2,

Hexagonal socket head screws : 4, Flat washers : 4, Upper brackets (left and right) : 2, Lower brackets : 2,

Hexagonal wrench (M8) : 1, Hexagonal wrench (M5) : 1, Short marker tray:1, Side covers: 2

M3 decorative screws : 2

Assembly and installation flow

Assembling

Mounting

Mounting

Mounting the

Changing the

the brackets

the copyboard

vertical marker tray

image storing

the stand

on the copyboard

onto the stand

on the copyboard

setting to “vertical”

 

(1)Assemble the T-shaped legs (two).

￿Mount the foot using two M8 x 50 screws (+ spring washers).

￿Fit the caps on the top of the frame and feet.

Cap

2

Frame

Spring washer

Foot washer

M8 x 50 hexagonal socket head screw

M8 hexagonal wrench

(2)Mount the two crossbars onto the T-shaped legs assembled in (1) above.

Cap

2

Crossbar

2

1

Cap

Foot

Mount them using the hexagonal socket head screws and flat washers.

Temporarily fasten the screws using the included hexagonal wrench, then fasten them securely once both the upper and lower crossbars have been mounted.

* Assemble in a flat place.

Flat washer

M5 hexagonal socket head screw

M5 hexagonal wrench

T-shaped leg

Crossbar

15

Image 15
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Names of Parts Front and topBack and bottom Installation Assembly Instructions On a stand horizontal or vertical Read This Before InstallingTypes of Installation On a wall horizontal or verticalOn the copyboard Installing on a WallInstallation Selecting the place of installationConcrete U-plugs Material of wall Method of installation WoodFix the wall mount bar to the wall surface and posts Attach the marker tray to the CopyboardM412 screws Upper bracket Legs assembled in 1 above Installing on a StandAssembly and installation flow Mount the two crossbars onto the T-shapedMount the upper and lower brackets using M4 Screws On the copyboard Onto the stand Assembling the stand and mounting the copyboard verticallyAssembling Mounting Changing Brackets Copyboard Image storingMount the upper and lower brackets using M4 x 12 screws Mount the short marker trayChange the direction of image data PO- Sition to vertical List of parts included in the partition hanger kit Installing on a Partition-PanelAssembly and installation On the copyboard On the partition hangersCatch the hooks onto partition panel Mount the copyboard on the partition panelApplications of copyboard data Saving and Transferring imagesStoring images on CF memory cards Editing and printing imagesMemory indicator Amber When set verticallyPower button Power indicator GreenRemoving the CF memory card Handling CF Memory CardsScanning area Inserting CF memory cardsOperating the Copyboard Connect the AC power adapterPress the Power button to turn on the power When not using the copyboardPress the Memory button to store that image in the memory If the indicator blinks intermittentlySaving the Image on the Sheet  Saving sheet images in the built-in memoryInsert the CF memory card into the copyboard’s card slot  Saving sheet images on a CF memory cardVertical/Horizontal Position Setting Clearing the built-in MemoryScrolling the Sheet Connect the USB cable Storing Image Files on a ComputerStore the copyboard’s image folder onto the computer Open My Computer of the computerDeleting files Disconnect the USB cableWindows 98SE Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Check the following before asking for repairs TroubleshootingSpecifications Clean the sheet surface Start the calibration procedureQuick Calibration Software Guide Before Using the Software Software Contents and OverviewOperating Environment Click the M-5 USB Driver Driver Setup Windows 98SEInstallation preparation Setup flowThis completes the setup Uninstalling the Driver Windows 98SEOpen the Device Manager screen and check the installation Uninstall the M-5 driverCheck whether the Copyboard is operating properly Connect the Copyboard with the personal computerDisconnect the USB cable from the personal com- puter Disconnecting of the CopyboardWindows 98SE Windows Me / 2000 / XPStarting up Setup UtilityInstallation Click M-5 Setup UtilityClick Acrobat Reader Acrobat Reader InstallationClick Image Viewer Plus Image ViewerSelect Start → Setting→ Control Panel Deleting the SoftwareSelect the Remove button of the wizard and click Next 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.