PLUS Vision M-5 user manual Installing on a Partition-Panel, Assembly and installation, Copyboard

Page 17

Installing on a Partition-Panel

The optional partition hanger kit (Model M-5-P, order code 44-552) is required to install the copyboard on a partition- panel.

Assembly and installation

Parts included in the copyboard package : Marker tray (1 pc), side covers (2 pcs), M4 x 8 marker tray installation screws (3 pcs, screws removed when unpacking)

List of parts included in the partition hanger kit

Partition hangers : 2, Hanger brackets : 2, Hooks : 2, M4 x 12 screws : 8 , M4 x 8 flat head screws : 4 ,

M4 x 6 screws : 4

Assembly and installation flow

Mounting

Mounting

Mounting the hanger

Mounting

the marker tray

the partition hangers

brackets and hooks

the copyboard

on the copyboard

on the copyboard

on the partition hangers

on the partition

(1)Attach the marker tray to the Copyboard.

￿Insert the side covers into both ends of the marker tray.

•Note that there are left and right type side covers.

￿Temporarily fasten the three M4 x 8 screws into the Copyboard (leaving about 3 mm)

•Use the supplied screwdriver.

￿Insert the marker tray over the 3 screws that have been temporarily fastened, and then tighten securely.

•Please insert the marker tray as far as they will go.

(2)Mount the partition hangers onto the copyboard (fasten at 4 spots).

Use the M4 x 12 screws (2 each).

Side cover

1

3

2

M4 x 8 screws

3

Marker tray

Partition hanger M4 screws

M4 screws

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Back and bottom Names of PartsFront and top Installation Assembly Instructions Types of Installation Read This Before InstallingOn a wall horizontal or vertical On a stand horizontal or verticalInstallation Installing on a WallSelecting the place of installation On the copyboardFix the wall mount bar to the wall surface and posts Material of wall Method of installation WoodAttach the marker tray to the Copyboard Concrete U-plugsM412 screws Upper bracket Assembly and installation flow Installing on a StandMount the two crossbars onto the T-shaped Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Assembling Mounting Changing Brackets Copyboard Assembling the stand and mounting the copyboard verticallyImage storing On the copyboard Onto the standChange the direction of image data PO- Sition to vertical Mount the upper and lower brackets using M4 x 12 screwsMount the short marker tray Assembly and installation Installing on a Partition-PanelOn the copyboard On the partition hangers List of parts included in the partition hanger kitCatch the hooks onto partition panel Mount the copyboard on the partition panelStoring images on CF memory cards Saving and Transferring imagesEditing and printing images Applications of copyboard dataPower button When set verticallyPower indicator Green Memory indicator AmberScanning area Handling CF Memory CardsInserting CF memory cards Removing the CF memory cardPress the Power button to turn on the power Connect the AC power adapterWhen not using the copyboard Operating the CopyboardSaving the Image on the Sheet If the indicator blinks intermittently Saving sheet images in the built-in memory Press the Memory button to store that image in the memoryInsert the CF memory card into the copyboard’s card slot  Saving sheet images on a CF memory cardScrolling the Sheet Vertical/Horizontal Position SettingClearing the built-in Memory Connect the USB cable Storing Image Files on a ComputerStore the copyboard’s image folder onto the computer Open My Computer of the computerWindows 98SE Deleting filesDisconnect the USB cable Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Check the following before asking for repairs TroubleshootingSpecifications Quick Calibration Clean the sheet surfaceStart the calibration procedure Software Guide Operating Environment Before Using the SoftwareSoftware Contents and Overview Installation preparation Driver Setup Windows 98SESetup flow Click the M-5 USB DriverOpen the Device Manager screen and check the installation Uninstalling the Driver Windows 98SEUninstall the M-5 driver This completes the setupCheck whether the Copyboard is operating properly Connect the Copyboard with the personal computerWindows 98SE Disconnecting of the CopyboardWindows Me / 2000 / XP Disconnect the USB cable from the personal com- puterInstallation Setup UtilityClick M-5 Setup Utility Starting upClick Acrobat Reader Acrobat Reader InstallationClick Image Viewer Plus Image ViewerSelect the Remove button of the wizard and click Next Select Start → Setting→ Control PanelDeleting the Software 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.
Top Page Image Contents