PLUS Vision M-5 Quick Calibration, Clean the sheet surface, Start the calibration procedure

Page 34

Quick Calibration

The procedure described below is used to adjust (calibrate) for optimum scanning condition of the sheet surface. Perform this quick calibration procedure after replacing the fluorescent lamp or if dark lines appear in the horizontal direction when the copyboard is mounted on the wall.

Clean the sheet surface.

Approx. 10cm

 

First clean a strip about 10 cm wide along the left side of the sheet surface.

Make sure the sheet is completely clean and there are no marker traces left.

*Apply some water to a soft cloth, wring out thoroughly, then wipe the sheet clean. For tough dirt, wipe using a clean cloth with a so- lution of diluted neutral detergent, then wipe again with a cloth dampened with water to re- move all traces of the detergent.

Caution:

Move the sheet so that the seam of the sheet does not enter the 10 cm portion at the left side which is going to be cleaned.

Start the calibration procedure.

Preparations: If the power cord is plugged into a power outlet, unplug it.

Plug the power cord into a power outlet while pressing the FEED/STOP button.

•The sheet automatically moves about one brock of ruled line and calibration is performed.

•The MEMORY indicator blinks slowly during this process (calibration takes about 5 minutes).

•The power turns off once calibration is completed. All copyboard operations can be made after turn- ing on the power.

FEED /STOP

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Front and top Names of PartsBack and bottom Installation Assembly Instructions On a wall horizontal or vertical Read This Before InstallingTypes of Installation On a stand horizontal or verticalSelecting the place of installation Installing on a WallInstallation On the copyboardAttach the marker tray to the Copyboard Material of wall Method of installation WoodFix the wall mount bar to the wall surface and posts Concrete U-plugsM412 screws Upper bracket Mount the two crossbars onto the T-shaped Installing on a StandAssembly and installation flow Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Image storing Assembling the stand and mounting the copyboard verticallyAssembling Mounting Changing Brackets Copyboard On the copyboard Onto the standMount the short marker tray Mount the upper and lower brackets using M4 x 12 screwsChange the direction of image data PO- Sition to vertical On the copyboard On the partition hangers Installing on a Partition-PanelAssembly and installation List of parts included in the partition hanger kitMount the copyboard on the partition panel Catch the hooks onto partition panelEditing and printing images Saving and Transferring imagesStoring images on CF memory cards Applications of copyboard dataPower indicator Green When set verticallyPower button Memory indicator AmberInserting CF memory cards Handling CF Memory CardsScanning area Removing the CF memory cardWhen not using the copyboard Connect the AC power adapterPress the Power button to turn on the power Operating the Copyboard Saving sheet images in the built-in memory If the indicator blinks intermittentlySaving the Image on the Sheet Press the Memory button to store that image in the memory Saving sheet images on a CF memory card Insert the CF memory card into the copyboard’s card slotClearing the built-in Memory Vertical/Horizontal Position SettingScrolling the Sheet Storing Image Files on a Computer Connect the USB cableOpen My Computer of the computer Store the copyboard’s image folder onto the computerDisconnect the USB cable Deleting filesWindows 98SE Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Troubleshooting Check the following before asking for repairsSpecifications Start the calibration procedure Clean the sheet surfaceQuick Calibration Software Guide Software Contents and Overview Before Using the SoftwareOperating Environment Setup flow Driver Setup Windows 98SEInstallation preparation Click the M-5 USB DriverUninstall the M-5 driver Uninstalling the Driver Windows 98SEOpen the Device Manager screen and check the installation This completes the setupConnect the Copyboard with the personal computer Check whether the Copyboard is operating properlyWindows Me / 2000 / XP Disconnecting of the CopyboardWindows 98SE Disconnect the USB cable from the personal com- puterClick M-5 Setup Utility Setup UtilityInstallation Starting upAcrobat Reader Installation Click Acrobat ReaderPlus Image Viewer Click Image ViewerDeleting the Software Select Start → Setting→ Control PanelSelect the Remove button of the wizard and click Next 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.
Top Page Image Contents