PLUS Vision M-5 user manual Attach the marker tray to the Copyboard

Page 14

(3)Attach the marker tray to the Copyboard.

￿Insert the side covers into both ends of the marker tray.

•Note that there are left and right type side covers.

￿Temporarily fasten the three M4 x 8 screws into the Copyboard (leaving about 3 mm)

•Use the supplied screwdriver.

￿Insert the marker tray over the 3 screws that have been temporarily fastened, and then tighten securely.

•Please insert the marker tray as far as they will go.

Side covers

1

3

2

M4 x 8 screws

3

Marker tray

(4)Mount the upper and lower brackets using M4

x12 screws.

Upper bracket (Rightt)

•The left and right upper brackets are differ- ent. Be sure to mount them on the proper side.

•Both the lower brackets have the same form, but mount them in the opposite di- rections so that each is facing outwards.

Upper bracket (Left)

M412 screws

Lower bracket

M412 screws

M412 screws

(5)Hook the left and right upper brackets of the Copyboard onto the upper crossbar and fas- ten the lower brackets using the fixing knobs and hexagon cap nuts.

CAUTION

•Lock the casters so that the stand does not move.

•When mounting and adjusting the height, at least two people should hold the copyboard to prevent it from dropping or tipping over, resulting in unex- pected injury.

Fixing knobs

Hexagon cap nuts

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Back and bottom Names of PartsFront and top Installation Assembly Instructions On a wall horizontal or vertical Read This Before InstallingTypes of Installation On a stand horizontal or verticalSelecting the place of installation Installing on a WallInstallation On the copyboardAttach the marker tray to the Copyboard Material of wall Method of installation WoodFix the wall mount bar to the wall surface and posts Concrete U-plugsM412 screws Upper bracket Mount the two crossbars onto the T-shaped Installing on a StandAssembly and installation flow Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Image storing Assembling the stand and mounting the copyboard verticallyAssembling Mounting Changing Brackets Copyboard On the copyboard Onto the standChange the direction of image data PO- Sition to vertical Mount the upper and lower brackets using M4 x 12 screwsMount the short marker tray On the copyboard On the partition hangers Installing on a Partition-PanelAssembly and installation List of parts included in the partition hanger kitMount the copyboard on the partition panel Catch the hooks onto partition panelEditing and printing images Saving and Transferring imagesStoring images on CF memory cards Applications of copyboard dataPower indicator Green When set verticallyPower button Memory indicator AmberInserting CF memory cards Handling CF Memory CardsScanning area Removing the CF memory cardWhen not using the copyboard Connect the AC power adapterPress the Power button to turn on the power Operating the Copyboard Saving sheet images in the built-in memory If the indicator blinks intermittentlySaving the Image on the Sheet Press the Memory button to store that image in the memory Saving sheet images on a CF memory card Insert the CF memory card into the copyboard’s card slotScrolling the Sheet Vertical/Horizontal Position SettingClearing the built-in Memory Storing Image Files on a Computer Connect the USB cableOpen My Computer of the computer Store the copyboard’s image folder onto the computerWindows 98SE Deleting filesDisconnect the USB cable Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Troubleshooting Check the following before asking for repairsSpecifications Quick Calibration Clean the sheet surfaceStart the calibration procedure Software Guide Operating Environment Before Using the SoftwareSoftware Contents and Overview Setup flow Driver Setup Windows 98SEInstallation preparation Click the M-5 USB DriverUninstall the M-5 driver Uninstalling the Driver Windows 98SEOpen the Device Manager screen and check the installation This completes the setupConnect the Copyboard with the personal computer Check whether the Copyboard is operating properlyWindows Me / 2000 / XP Disconnecting of the CopyboardWindows 98SE Disconnect the USB cable from the personal com- puterClick M-5 Setup Utility Setup UtilityInstallation Starting upAcrobat Reader Installation Click Acrobat ReaderPlus Image Viewer Click Image ViewerSelect the Remove button of the wizard and click Next Select Start → Setting→ Control PanelDeleting the Software 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.
Top Page Image Contents