PLUS Vision Driver Setup Windows 98SE, Installation preparation, Click the M-5 USB Driver

Page 37

Windows 98SE Personal Computer and USB Connections

To make a USB connection with the Copyboard and a personal computer with Windows 98SE, please set up the driver according to the following procedure.

Driver Setup (Windows 98SE)

Note:

•Do not connect the Copyboard with the personal computer until Step .

•When using Windows Me, 2000, or XP, driver setup is not required. Make a USB connection with the Copyboard. The Windows standard driver will be installed automatically.

•This driver does not support Windows 95 or NT, 2000 Server or Server 2003.

Setup flow

Run the setup from

USB connection the

Driver installation check

 

 

the supplied CD-ROM

Copyboard

 

 

Installation preparation

Please close application software that is running on the personal computer. Failure to close the applications may result in installation problems.

Load the supplied CD-ROM into the CD-ROM drive of the personal computer.

The menu screen will appear automatically.

•If the menu screen does not appear automatically, open the CD-ROM and double click on "autorun.exe".

Click the [M-5 USB Driver]

The installer will start up. Follow the messages of the screen and perform the installation.

Note: When the copyboard is connected before setup, a screen requesting the driver will appear. Click "Cancel" and disconnect the power cable of the unit.

Under these circumstances, restart the personal computer following driver setup.

Making connections with the Copyboard

Connect the USB connector of the Copyboard with that of the personal computer using a USB cable, then plug the power cable into the power outlet.

• When connection is first made with the Copyboard, the "New hardware addition wizard" screen will appear. Please follow the instructions on the screen.

• Please check that the Copyboard is operating properly.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Front and top Names of PartsBack and bottom Installation Assembly Instructions Types of Installation Read This Before InstallingOn a wall horizontal or vertical On a stand horizontal or verticalInstallation Installing on a WallSelecting the place of installation On the copyboardFix the wall mount bar to the wall surface and posts Material of wall Method of installation WoodAttach the marker tray to the Copyboard Concrete U-plugsM412 screws Upper bracket Assembly and installation flow Installing on a StandMount the two crossbars onto the T-shaped Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Assembling Mounting Changing Brackets Copyboard Assembling the stand and mounting the copyboard verticallyImage storing On the copyboard Onto the standMount the short marker tray Mount the upper and lower brackets using M4 x 12 screwsChange the direction of image data PO- Sition to vertical Assembly and installation Installing on a Partition-PanelOn the copyboard On the partition hangers List of parts included in the partition hanger kitCatch the hooks onto partition panel Mount the copyboard on the partition panelStoring images on CF memory cards Saving and Transferring imagesEditing and printing images Applications of copyboard dataPower button When set verticallyPower indicator Green Memory indicator AmberScanning area Handling CF Memory CardsInserting CF memory cards Removing the CF memory cardPress the Power button to turn on the power Connect the AC power adapterWhen not using the copyboard Operating the CopyboardSaving the Image on the Sheet If the indicator blinks intermittently Saving sheet images in the built-in memory Press the Memory button to store that image in the memoryInsert the CF memory card into the copyboard’s card slot  Saving sheet images on a CF memory cardClearing the built-in Memory Vertical/Horizontal Position SettingScrolling the Sheet Connect the USB cable Storing Image Files on a ComputerStore the copyboard’s image folder onto the computer Open My Computer of the computerDisconnect the USB cable Deleting filesWindows 98SE Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Check the following before asking for repairs TroubleshootingSpecifications Start the calibration procedure Clean the sheet surfaceQuick Calibration Software Guide Software Contents and Overview Before Using the SoftwareOperating Environment Installation preparation Driver Setup Windows 98SESetup flow Click the M-5 USB DriverOpen the Device Manager screen and check the installation Uninstalling the Driver Windows 98SEUninstall the M-5 driver This completes the setupCheck whether the Copyboard is operating properly Connect the Copyboard with the personal computerWindows 98SE Disconnecting of the CopyboardWindows Me / 2000 / XP Disconnect the USB cable from the personal com- puterInstallation Setup UtilityClick M-5 Setup Utility Starting upClick Acrobat Reader Acrobat Reader InstallationClick Image Viewer Plus Image ViewerDeleting the Software Select Start → Setting→ Control PanelSelect the Remove button of the wizard and click Next 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.
Top Page Image Contents