PLUS Vision M-5 Fix the wall mount bar to the wall surface and posts, Concrete U-plugs, Steel

[Reference] Method of installation for different wall materials

Select the type of installation best suited for the wall material.

If the wall is not strong enough, mount the copyboard to columns or studs.

Material of wall	Method of installation
Wood	Wood screws:	1
	￿Open holes using a drill, then ￿ mount the copyboard
	using wood screws.

2

Concrete U-plugs:

￿Open the base hole in the wall using a drill, ￿ insert the U-plug, then ￿ fasten the wall mount bar using screws.

1

2

3

Steel	Cross recessed tapping screw (pan head):
	Check that there is reinforcement inside the steel wall, open holes with
	a drill of the proper diameter, then mount the wall mount bar using tapping
	screws.

(2)Fix the wall mount bar to the wall surface and posts.

• Fasten the screws in a minimum of 3 places.

Mounting on the wall surface

M6 screw

Mounting on a post

M6 wood screw

(3)Attach the marker tray to the Copyboard.

￿Insert the side covers into both ends of the marker tray.

•Note that there are left and right type side covers.

￿Temporarily fasten the three M4 x 8 screws into the Copyboard (leaving about 3 mm)

•Use the supplied screwdriver.

￿Insert the marker tray over the 3 screws that have been temporarily fastened, and then tighten securely.

•Please insert the marker tray as far as they will go.

3

2

M4 x 8 screws

Side covers

1

3

Marker tray

11