PLUS Vision M-5 user manual Installing on a Stand, Mount the two crossbars onto the T-shaped

Page 13

Installing on a Stand

The optional stand kit for both vertical and horizontal installation (Model M-5-T, order code 44-562) is required to install the copyboard on a stand.

Assembling the stand and mounting the copyboard horizontally

Parts included in the copyboard package: Marker tray (1 pc), side covers (2 pcs), M4 x 8 marker tray installation screws (3 pcs, screws removed when unpacking), 8 copyboard mount screws (M4 x 12)

List of parts included in the stand kit (parts used for horizontal installation)

Feet (with casters) : 2, Frames : 2, Foot washers : 2, Foot fixing screws (M8 x 50) : 4, Spring washers : 4,

Extension frames : 2, Caps : 6, Fixing knobs (with hexagon cap nuts) : 2, Crossbars : 2,

Hexagonal socket head screws : 4, Flat washers : 4, Upper brackets (left and right) : 2, Lower brackets : 2,

Hexagonal wrench (M8) : 1, Hexagonal wrench (M5) : 1

Assembly and installation flow

Assembling

Mounting

Mounting

Mounting the

the stand

the marker tray on the copyboard

the brackets

copyboard

on the copyboard

onto the stand

(1) Assemble the T-shaped legs (two).

￿ Mount the foot using washers, spring wash-

Cap

Spring washer

ers and M8 x 50 hexagonal socket head screws.

3

Extension frame

2

Foot washer

￿ Make sure of the orientation of the extension frame

and the frame end looking at the marks, then insert

all the way. (Note that it will no longer be possible to

remove the extension frame when the mark sur-

Frame

M8 x 50 hexagonal socket head screw

M8 hexagonal wrench

face has been inserted in the opposite orientation.)

Notice:

• Mounting the extension frame makes for a height

of 1700 mm off the floor (compared to 1465 mm

without the extension frame). Use this to adjust

the height.

• For the assembly procedure when not mounting

the extension frames, see step (1) under “Assem-

bling the stand and mounting the copyboard ver-

tically”.

￿ Fit the caps on the top of the frame and feet.

(2) Mount the two crossbars onto the T-shaped

legs assembled in (1) above.

Mount them using the M5 hexagonal socket head

screws and flat washers.

Temporarily fasten the screws using the included M5

hexagonal wrench, then fasten them securely once

both the upper and lower crossbars have been

mounted.

3

1

Cap

Cap

Foot

3

Crossbar

Flat washer

M5 hexagonal socket head screw

T-shaped leg

M5 hexagonal wrench

* Assemble in a flat place.

Crossbar

13

Image 13
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Front and top Names of PartsBack and bottom Installation Assembly Instructions Types of Installation Read This Before InstallingOn a wall horizontal or vertical On a stand horizontal or verticalInstallation Installing on a WallSelecting the place of installation On the copyboardFix the wall mount bar to the wall surface and posts Material of wall Method of installation WoodAttach the marker tray to the Copyboard Concrete U-plugsM412 screws Upper bracket Assembly and installation flow Installing on a StandMount the two crossbars onto the T-shaped Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Assembling Mounting Changing Brackets Copyboard Assembling the stand and mounting the copyboard verticallyImage storing On the copyboard Onto the standMount the short marker tray Mount the upper and lower brackets using M4 x 12 screwsChange the direction of image data PO- Sition to vertical Assembly and installation Installing on a Partition-PanelOn the copyboard On the partition hangers List of parts included in the partition hanger kitCatch the hooks onto partition panel Mount the copyboard on the partition panelStoring images on CF memory cards Saving and Transferring imagesEditing and printing images Applications of copyboard dataPower button When set verticallyPower indicator Green Memory indicator AmberScanning area Handling CF Memory CardsInserting CF memory cards Removing the CF memory cardPress the Power button to turn on the power Connect the AC power adapterWhen not using the copyboard Operating the CopyboardSaving the Image on the Sheet If the indicator blinks intermittently Saving sheet images in the built-in memory Press the Memory button to store that image in the memoryInsert the CF memory card into the copyboard’s card slot  Saving sheet images on a CF memory cardClearing the built-in Memory Vertical/Horizontal Position SettingScrolling the Sheet Connect the USB cable Storing Image Files on a ComputerStore the copyboard’s image folder onto the computer Open My Computer of the computerDisconnect the USB cable Deleting filesWindows 98SE Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Check the following before asking for repairs TroubleshootingSpecifications Start the calibration procedure Clean the sheet surfaceQuick Calibration Software Guide Software Contents and Overview Before Using the SoftwareOperating Environment Installation preparation Driver Setup Windows 98SESetup flow Click the M-5 USB DriverOpen the Device Manager screen and check the installation Uninstalling the Driver Windows 98SEUninstall the M-5 driver This completes the setupCheck whether the Copyboard is operating properly Connect the Copyboard with the personal computerWindows 98SE Disconnecting of the CopyboardWindows Me / 2000 / XP Disconnect the USB cable from the personal com- puterInstallation Setup UtilityClick M-5 Setup Utility Starting upClick Acrobat Reader Acrobat Reader InstallationClick Image Viewer Plus Image ViewerDeleting the Software Select Start → Setting→ Control PanelSelect the Remove button of the wizard and click Next 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.