PLUS Vision M-5 user manual Deleting files, Disconnect the USB cable, Windows 98SE

Page 28

Deleting files

If the built-in memory or CF memory card gets full, some im- age files must be deleted.

(The built-in memory can be cleared completely using the CLEAR button on the copyboard’s control panel.)

(1)Select the drive for the built-in memory or the CF memory card (steps to above).

(2)At step , open the PVM folder, select the image files you want to delete, then select open “File” menu in Explorer and click “Delete”.

To delete all the image files at once, delete the PVM folder.

Note:

•Be sure to store (back up) important image files onto the computer or a CF memory card before clearing the built-in memory.

•Do not remove the CF memory card or disconnect the USB cable while files are being stored or deleted. Doing so will damage the data.

•These operations may not work properly if several USB devices are connected to the computer and being used simultaneously.

•If connected to a USB hub, or if connected using an extension cable these operations may not work properly. Connect directly to the computer’s USB port.

Disconnect the USB cable.

The disconnecting procedure depends on the computer’s op- erating system. For details, refer to the computer’s operating instructions or help files.

Windows 98SE

￿Check that the MEMORY indicator has stopped blinking and turned off.

 

 

 

 

 

R

Y

 

 

 

 

O

 

 

 

EM

 

 

 

 

M

 

 

 

 

 

 

 

P

 

 

EDTO

 

 

 

 

 

FE /S

 

 

 

 

 

 

 

W

ER

 

 

O

 

 

 

 

P

 

 

 

 

 

 

 

 

 

A

R

 

C

 

LE

 

 

 

 

POSITION

 

 

MEMORY indicator

￿Right click on the "Removable Disk" icon of "My Computer" and left click on "Remove" of the menu.

Wait a little while before proceeding to Step￿.

￿Disconnect the USB cable.

continued on next page

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Front and top Names of PartsBack and bottom Installation Assembly Instructions Read This Before Installing Types of InstallationOn a wall horizontal or vertical On a stand horizontal or verticalInstalling on a Wall InstallationSelecting the place of installation On the copyboardMaterial of wall Method of installation Wood Fix the wall mount bar to the wall surface and postsAttach the marker tray to the Copyboard Concrete U-plugsM412 screws Upper bracket Installing on a Stand Assembly and installation flowMount the two crossbars onto the T-shaped Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Assembling the stand and mounting the copyboard vertically Assembling Mounting Changing Brackets CopyboardImage storing On the copyboard Onto the standMount the short marker tray Mount the upper and lower brackets using M4 x 12 screwsChange the direction of image data PO- Sition to vertical Installing on a Partition-Panel Assembly and installationOn the copyboard On the partition hangers List of parts included in the partition hanger kitMount the copyboard on the partition panel Catch the hooks onto partition panelSaving and Transferring images Storing images on CF memory cardsEditing and printing images Applications of copyboard dataWhen set vertically Power buttonPower indicator Green Memory indicator AmberHandling CF Memory Cards Scanning areaInserting CF memory cards Removing the CF memory cardConnect the AC power adapter Press the Power button to turn on the powerWhen not using the copyboard Operating the CopyboardIf the indicator blinks intermittently Saving the Image on the Sheet Saving sheet images in the built-in memory Press the Memory button to store that image in the memory Saving sheet images on a CF memory card Insert the CF memory card into the copyboard’s card slotClearing the built-in Memory Vertical/Horizontal Position SettingScrolling the Sheet Storing Image Files on a Computer Connect the USB cableOpen My Computer of the computer Store the copyboard’s image folder onto the computerDisconnect the USB cable Deleting filesWindows 98SE Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Troubleshooting Check the following before asking for repairsSpecifications Start the calibration procedure Clean the sheet surfaceQuick Calibration Software Guide Software Contents and Overview Before Using the SoftwareOperating Environment Driver Setup Windows 98SE Installation preparationSetup flow Click the M-5 USB DriverUninstalling the Driver Windows 98SE Open the Device Manager screen and check the installationUninstall the M-5 driver This completes the setupConnect the Copyboard with the personal computer Check whether the Copyboard is operating properlyDisconnecting of the Copyboard Windows 98SEWindows Me / 2000 / XP Disconnect the USB cable from the personal com- puterSetup Utility InstallationClick M-5 Setup Utility Starting upAcrobat Reader Installation Click Acrobat ReaderPlus Image Viewer Click Image ViewerDeleting the Software Select Start → Setting→ Control PanelSelect the Remove button of the wizard and click Next 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.
Top Page Image Contents