PLUS Vision M-5 user manual Important Safety Information

Page 4

IMPORTANT SAFETY INFORMATION

WARNING

The unit’s rear panel should never be opened by anyone other than a qualified serviceperson. There are many high voltage parts inside the unit, and touching them is dangerous. For replacement of the light source, internal inspections, adjustments, repairs or internal cleaning, please contact your store of pur- chase.

CAUTION

Continued use of the unit under abnormal conditions (when the unit is emitting smoke, unusual odors or sounds) could lead to fire or electric shocks.

Turn off the unit’s power immediately, then unplug the AC power adapter from the power outlet. Check that no more smoke, etc., is being emitted, then contact a sales outlet for repairs. Repairing the unit yourself is dangerous. Never attempt to do so.

WARNING

This is a FCC class A product. In a home environment this product may cause radio interference in which case the user may be required to take adequate measures.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

SAFETY PRECAUTIONS

Heeding the safety precautions below will lengthen the product’s service life and prevent fires, electric shocks and injury. Read these safety precautions carefully and be sure to heed them.

Handling the AC power adapter

Do not connect any AC adapter other than the dedicated one to the unit. Doing so could result in fire or other accidents.

Do not use with voltages other than the voltage indicated. Doing so could result in fire or electric shock.

Do not let the AC power adapter get wet. Doing so could result in fire or electric shock.

Do not subject the AC power adapter to shocks. Doing so could result in fire or electric shock.

Handling the AC power adapter’s cord and plug

Damaging the power cord could lead to fire or electric shock.

*When installing, do not squeeze the power cord between the product and a wall, rack, etc.

*Do not modify or damage the power cord.

*Do not place heavy objects on the power cord or pull strongly on it.

*Do not place the power cord near heating appliances or otherwise heat it.

*When unplugging the power cord, always do so by pulling on the plug, not the cord.

If the power cord should be damaged, ask your store of purchase to replace it.

If there is dust or metal objects on or near the power plug’s blades, unplug the power cord then wipe the blade area clean using a dry cloth. Continued use without cleaning the plug could lead to fire or electric shock.

Do not plug in or unplug the power cord with wet hands. Doing so could lead to electric shock.

When moving the unit, turn off the power and be sure to unplug the power cord from the AC outlet first. Moving the unit with the power cord plugged in could damage the cord, leading to fire or electric shock.

Connect the power plug securely to the AC outlet, pressing the blades in to the hilt. Uncomplete plugging could cause heating or attract dust, leading to fire. In addition, touching the plug’s blades could cause electric shock.

4

Image 4
Contents Copyboard M-5 Trademarks Table of Contents Important Safety Information Care and Cleaning Packaged Contents Front and top Names of PartsBack and bottom Installation Assembly Instructions Read This Before Installing Types of InstallationOn a wall horizontal or vertical On a stand horizontal or verticalInstalling on a Wall InstallationSelecting the place of installation On the copyboardMaterial of wall Method of installation Wood Fix the wall mount bar to the wall surface and postsAttach the marker tray to the Copyboard Concrete U-plugsM412 screws Upper bracket Installing on a Stand Assembly and installation flowMount the two crossbars onto the T-shaped Legs assembled in 1 aboveMount the upper and lower brackets using M4 Screws Assembling the stand and mounting the copyboard vertically Assembling Mounting Changing Brackets CopyboardImage storing On the copyboard Onto the standMount the short marker tray Mount the upper and lower brackets using M4 x 12 screwsChange the direction of image data PO- Sition to vertical Installing on a Partition-Panel Assembly and installationOn the copyboard On the partition hangers List of parts included in the partition hanger kitMount the copyboard on the partition panel Catch the hooks onto partition panelSaving and Transferring images Storing images on CF memory cardsEditing and printing images Applications of copyboard dataWhen set vertically Power buttonPower indicator Green Memory indicator AmberHandling CF Memory Cards Scanning areaInserting CF memory cards Removing the CF memory cardConnect the AC power adapter Press the Power button to turn on the powerWhen not using the copyboard Operating the CopyboardIf the indicator blinks intermittently Saving the Image on the Sheet Saving sheet images in the built-in memory Press the Memory button to store that image in the memory Saving sheet images on a CF memory card Insert the CF memory card into the copyboard’s card slotClearing the built-in Memory Vertical/Horizontal Position SettingScrolling the Sheet Storing Image Files on a Computer Connect the USB cableOpen My Computer of the computer Store the copyboard’s image folder onto the computerDisconnect the USB cable Deleting filesWindows 98SE Windows Me/2000/XP  Using a PC card adapter  Using a memory card reader/writer USB type Troubleshooting Check the following before asking for repairsSpecifications Start the calibration procedure Clean the sheet surfaceQuick Calibration Software Guide Software Contents and Overview Before Using the SoftwareOperating Environment Driver Setup Windows 98SE Installation preparationSetup flow Click the M-5 USB DriverUninstalling the Driver Windows 98SE Open the Device Manager screen and check the installationUninstall the M-5 driver This completes the setupConnect the Copyboard with the personal computer Check whether the Copyboard is operating properlyDisconnecting of the Copyboard Windows 98SEWindows Me / 2000 / XP Disconnect the USB cable from the personal com- puterSetup Utility InstallationClick M-5 Setup Utility Starting upAcrobat Reader Installation Click Acrobat ReaderPlus Image Viewer Click Image ViewerDeleting the Software Select Start → Setting→ Control PanelSelect the Remove button of the wizard and click Next 13-2127-04B

M-5 specifications

The PLUS Vision M-5 is a cutting-edge document camera and visual presenter that stands out in the educational and professional sectors. Designed with versatility and high performance in mind, this device caters to the needs of teachers, students, and business professionals alike.

One of the main features of the PLUS Vision M-5 is its high-resolution imaging capability. It offers an impressive maximum resolution of 1080p, ensuring that every detail in documents, images, or 3D objects is captured clearly and vividly. This high-definition output is critical in educational settings where clarity can significantly enhance the learning experience.

Equipped with a 16x optical zoom, the M-5 allows users to focus on intricate details without sacrificing image quality. This zoom feature is particularly beneficial for displaying small texts, intricate graphics, and technical illustrations, making it a valuable tool for subjects that require close examination such as sciences and engineering.

The M-5 also supports a range of connectivity options, including USB and HDMI outputs. This versatility allows for quick and easy connection to various devices such as laptops, projectors, and interactive whiteboards. The USB function enables simple plug-and-play usability, while HDMI ensures high-quality video output to large screens.

Another notable technology found in the PLUS Vision M-5 is its advanced image processing capabilities. It includes features like automatic focus, white balance adjustment, and image enhancement algorithms, which work together to present the best possible image quality. This technology ensures that colors are vibrant and true-to-life, making presentations and lessons more engaging.

The design of the M-5 also deserves mention. Its compact and lightweight structure makes it portable and easy to store, which is particularly advantageous for educators who frequently move between classrooms. The foldable arm design ensures convenience without compromising on the camera's functionality.

Furthermore, the PLUS Vision M-5 integrates seamlessly with interactive software applications. This compatibility allows educators to annotate and highlight documents in real-time, fostering an interactive learning environment. The ability to capture still images and videos adds another layer of functionality, enabling users to create digital content for further study or sharing.

Overall, the PLUS Vision M-5 combines high-quality imaging, versatile connectivity, and user-friendly features, making it a top choice for anyone in need of a reliable visual presenter. Whether in a classroom or a boardroom, it empowers users to deliver impactful presentations, enhance collaborative learning, and foster creativity.