PM725.manual 5/27/08 9:23 AM Page 14
Code Learning, Cont.
LEARNING COMMANDS
1. P ress and hold the Code Search button until the re d i nd icator stays on. Release the Code Search button.
2.Press the mode button for the type of device you want to learn (TV, VCR, Cable, etc.).
The indicator lights blinks off once.
3.Press the Learn button.
4.Press the button on the Learning Remote that you want to teach, e.g. Power.
5.Point both remotes at each other (see tips on page 11). Press and hold the Original Remote button that you want to learn, e.g. Power, until the indicator light turns off. If there is a problem with learning, the indicator light blinks for three seconds but the remote remains in the Learning mode. If this happens, repeat from Step 4.
6.Repeat Steps 4 and 5 for other buttons you want to learn.
7.Press and release the Code Search button when all desired original remote commands are learned. Code Learning is now complete.
Note: No functions may be stored under the
Code Search button, any mode button, AUX button, or the Learn button.
5.
Aprox. 1 inch apart
2.
4.
1.3.
Code Learning, Cont.
TO CLEAR ALL LEARNED COMMANDS UNDER A MODE
1.Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.
2.P ress and release the button for the mo de you want to clear (TV, VCR, etc.). The ind icator blinks of f .
3.Press and release the Learn button TWICE. The indicator blinks off.
4.Press and release Code Search. The indicator blinks off.
All learned Comma nds under that mo de are now cleare d.
2.
1,4. |
|
|
| 3. |
|
|
MASTER CLEAR - TO CLEAR ALL LEARNED COMMANDS, I.E. RETURN TO FACTORY DEFAULTS
1.Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.
2.Press and release the Learn button TWICE. The indicator blinks off.
3.Press and release Code Search. The indicator blinks off.
All Learned comma nds in the re mote are now cleare d.
1.,3.
2.
1 4 | 1 5 |
|