Philips 21PT5408/01 manual Connecting peripheral equipment, Video recorder, Other equipment

Connecting peripheral equipment

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2). The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.

The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.

Video recorder

EXT 2

Carry out the connections shown opposite, using a good quality euroconnector cable.

If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 6).

To reproduce the video recorder picture, press 0.

Video recorder with decoder

Connect the decoder to the second euroconnector socket of the video recorder.You will then be able to record scrambled transmissions.

Other equipment

EXT 1

Satellite receiver, decoder, CDV, games, etc. Carry out the connections shown opposite.

To optimise picture quality, connect the equipment which produces the RGB signals (digital decoder, games, etc.) to EXT1, and the equipment which produces the S-VHS signals (S-VHS and Hi-8 video recorders, certain DVD drives) to EXT2 and all other equipment to either EXT1 or EXT2.

Amplifier (only available on certain versions)

4 5 6

7 8 9

Y 0 ù

To connect to a hi-fi system, use an audio connection cable and connect the “L” and “R” outputs on the TV set to the “AUDIO IN” “L” and “R” input on your hi-fi amplifier.

To select connected equipment

Press the n key to select EXT1, EXT2, S-VHS2(S-VHS signals from the EXT2 socket) and AV for connections on the front panel. Most equipment (decoder, video recorder) carries out the switching itself.

10