Quick installation
When you turn on the TV set for the first time, a menu is displayed on screen.This menu prompts you to select the country and language for the menus:
Select Country
CountryLanguage
DKEspañol
ESvenska
FEnglish
FI | Dansk |
Æ GB | Nederlands |
If the menu is not displayed, press and hold down the ”- and ”+ keys on the TV set for 5 seconds to display the menu.
&Use the îÏ keys on the remote control to select your country and validate with ¬.
If your country does not appear in the list, select choice “. . .”
éNext select your language using the îÏ keys and validate with ¬.
“The search starts automatically.All the available TV programmes and radio stations will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press H. If no programme is found, consult the possible solutions p. 12.
‘If the transmitter or cable network sends the
automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.
(If this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In this case, indicate your choice using the îÏ keys and validate with ¬.
Program sort
&Press key H.The Main menu is displayed on the screen.
Mainge |
|
|
|
|
|
| ||
• Picture |
| Install |
| 00 |
| |||
• Sound |
| • Language |
|
| ||||
• Features |
|
|
| |||||
| • Country |
| 01 | TF1 | ||||
$Install |
|
| ||||||
|
|
|
| • Auto Store |
| 02 | FR2 | |
|
|
|
| • Manual Store |
|
| 03 ÆFR3 | |
|
|
|
|
|
|
| ||
|
|
|
| $ Sort | Æ | 04 | C + | |
|
|
|
| • Name |
| 05 | ARTE | |
|
|
|
|
| ||||
éWith the cursor, select the Install menu
followed by the Sort menu.
“Select the programme you want to move using
the îÏ keys and press ¬.
‘Then use the îÏ keys to select the new number and validate with È.
(Repeat steps “ and ‘ for each program you
wish to renumber.
§ To quit the menus, press d.
Program name
If required, you can give a name to the programmes and external connectors. Note: on installation, the programs are named automatically when an identification signal is sent.
&Press the H key.
éWith the cursor, select the Install menu, then
Name
“Use the îÏ keys to select the programme to name or rename.
‘Use the Ȭ keys to move around the name display area (5 characters) and the
îÏ keys to select the characters.
(When the name has been entered, use the È key to exit.The name is stored.
§Repeat steps “ to ( for each programme you wish to name.
è To quit the menus, press d.
4