Lenovo 3000 V100 warranty Replacing memory

Replacing memory

8.With the notched end of the SO-DIMM toward the contact edge side of the socket, firmly insert the SO-DIMM into the socket at an angle of about 20 degrees
1, then press it firmly
2.

2

1

9.Push the SO-DIMM down until it snaps into place.

10.Make sure that the memory module is firmly fixed in the slot and does not move easily.

11.Reinstall the cover of the memory slot by aligning the front side of the cover first
1, and closing the cover
2. Then tighten the two screws

3.

1	3
1
	3

2

Attention: When you have replaced the SO-DIMM, do not use your computer until you have closed the memory slot cover. Never use the computer with the cover open.

12.Reinstall the battery.

13.Turn the computer over again, and reconnect the ac adapter and cables to

the computer.

Chapter 5. Upgrading and replacing devices 29