Topcom Babytalker 2500
3.2 Baby unit (Illustrations C and D)
16. Night Light button | 23. Volume down button |
17. On/Off button | 24. Volume up button |
18. Paging button | 25. Night Light |
19. Power LED | 26. Hang handle |
20. Play button | 27. Battery cover screw |
21. Melody button | 28. Battery cover |
22. Microphone | 29. Power adapter connector |
4Getting started
4.1Baby unit battery Installation
The baby unit can be used either with 3 AA - Size batteries (alkaline batteries recommended) or the household AC current. The baby unit has no charging function!
It is recommended to add the batteries. It will automatic backup when there is a main power interruption.
90° MAX
- | 1 x AA |
+ | AA x 1 |
| |
| A |
| xA |
- | 1 |
|
+ 
-
+
1.Turn the screw 90° of the battery cover (27) on the backside of the baby unit in a counter clockwise direction using a screw driver. Remove the battery cover (28). Do not try to rotate the screw further than the position ‘open’.
2.Install 3 AA alkaline batteries following the polarity as shown.
3.Close the battery compartment.
4.Press 
(17). The power LED (19) will illuminate.
5.Press and hold 
(17) to switch off the baby unit.
When the battery level is low, the power LED (19) will blink.
Do not mix old batteries with new ones. Keep batteries away from small children Do not
Remove the batteries if this device is not going to be used for a long period.
4 | Topcom Babytalker 2500 |