Teledyne T201 manual Configurable Analog Output Overview, Hyperlink, Strip Chart, + +

3.0 CONFIGURABLE ANALOG OUTPUT OVERVIEW

There are three different methods to extract concentration data from the analyzer: internal data acquisition system (DAS), hyperlink, or strip chart.

DAS

The user can set up an internal DAS configuration either through the user display or using TAPI’s windows based software called APICOM. The analyzer stores data internally, which is available later for download through the RS-232 or Ethernet port.

Hyperlink

The user sends text based commands to retrieve data through the RS-232 port.

Strip Chart

The user interfaces a strip chart recorder and/or data-logger to the four analyzer analog output channels of the rear panel Analog Out connector (Figure 3-1). Table 3-1presents the default configurations of the analog outputs, and Table 3-2shows the Pin-outs for these four channels.

		ANALOG OUT
	A1	A2	A3	A4
+ -		+ - +	-	+ -

Figure 3-1. Analog Output Connector

Table 3-1. Analog Output Data Default Settings

ANALYZER		CHANNEL DEFAULT SETTING
	A1	A2	A3	A4
	TNxCNC1	NH3CNC1	NOCNC1	NO2CNC1
T201	5 Volts	5 Volts	5 Volts	5 Volts
	500 PPB	500 PPB	500 PPB	500 PPB

07271B DCN6646 25