Combi 8040 instruction manual Repeat for connector on opposite side, Fig. f

Page 25

8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 25

10Connect lower anchor connectors to vehicle lower anchors:

-Position red release button of push-on connector facing away from base and wording on back side of connector facing base. If connector is not in this position, turn connector over.

- Position the slot of the push-on connector over the vehicle anchorage. Push connector in to lock onto the vehicle anchorage (fig. f). You should hear a click.

- Pull on connector to be sure it is locked onto the anchorage.

- Repeat for connector on opposite side.	(fig. f)

11Tighten lower anchorage belt to secure the base. Press down in center of base to depress the vehicle cushion and pull free end of lower anchor belt to tighten belt around base (fig. g).

Check for secure installation. Pull base front to back and left to right to check for secure installation (fig. h). LATCH belt MUST stay tight.

If LATCH belt does not stay tight or base can not be securely		(fig. g)	(fig. h)
installed, try a different LATCH location or use the vehicle’s
seat belt to secure the base.	24

Image 25

Contents Combi Connection Infant Car Seat 8040 EN 122904.qxd 12/29/04 917 PM 8040 EN 122904.qxd 12/29/04 917 PM Table of Contents Located on back of seat pad Carry Infant CAR Seat Connection Infant Car Seat PartsCAR Seat Base Proper Use Check List Use Recommendations Height and Weight LimitsSecuring Infant In Car Seat 8040 EN 122904.qxd 12/29/04 917 PM Fig. a Click fig. b Rolled Towel See Harness Use and Adjustment sectionSelecting a Vehicle Seating Location Options For Securing a Car Seat Latch System On This Car Seat Latch SystemLatch System On Vehicles Fig. c Installation of Infant Car Seat in Vehicle Attaching Infant Car Seat To Base Removal Of Infant Car Seat From BaseStriped Zone Recline Indicator LineSecuring Base With Latch System LowerButton Anchor Belt Anchor ConnectorsStriped Zone GreenFig. f Repeat for connector on opposite sideRemoval Of Base Installed With Latch Anchor Connector Storage Of Lower Anchorage Belt And Lower Anchor ConnectorsSecuring Base With Vehicle Seat Belt Fig. b Recline Indicator Down over outside of blue belt guide 4 fig. d Fig. e Securing Infant Car Seat Without Base Fig. b Green Striped Zone Fig. d Belt Guide ShoulderRemoval Of Infant Car Seat From Vehicle Stroller or Travel System Use Harness Use and Adjustment Operation and AdjustmentUnder Shoulder Harness Loops Changing Use Position and Harness LengthShoulder Harness Under Adjuster CoverShoulder Harness Loop Tab Changing Shoulder Harness Slot Position Fig. d Adjustment Button Adjuster Handle Base AdjustmentEgg Shock Foam Infant Insert Egg Shock Pad Foam Infant InsertCanopy Vehicle Seat Belt Systems Flip Bight Belt Forward BuckleLap Belts With Retractor Lap or Shoulder Belt Mounted on Front Door fig. f Combination Lap/Shoulder Belt with Free Sliding Latch Plate Locking Clip stored in pouch on back of car seat Car seat is secure Certification Warm Weather Additional InformationCleaning Seat Care and CleaningRe-use After a Crash Registration Information Limited Warranty 8040 EN 122904.qxd 12/29/04 917 PM Designed by Parents, for Parents