
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 30
29
6 Route vehicle lap belt through base.
1
a. Starting on side of base where lap belt is attached to vehicle, route belt up over outside of blue belt guide 1 , into belt slot, down the outside of the base and across the bottom of the base to the opposite side 2 (fig. c).
| b. | On opposite side of car seat, thread vehicle lap belt up between base 3 | 2 | 
| 
 | ||
| 
 | and blue belt guide and place lap belt into belt slot on blue belt guide | (fig. c) | 
| 
 | and down over outside of blue belt guide 4 (fig. d). | |
| c. | Buckle belt. | 
 | 
| d. Check that vehicle lap belt is not twisted and lays flat across bottom of | 4 | |
| 
 | base. | |
NOTE: When installing with a lap and shoulder belt, route only the lap belt
through the base, DO NOT route the shoulder belt through base.
3