Combi 8040 instruction manual Under Adjuster Cover, Shoulder Harness Loop Tab

Page 40

8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 40

39

Changing Shoulder Harness Length:

1.Buckle harness and chest clip.

2.From front of car seat, loosen harness straps by pressing harness adjuster lever, 3 , and pulling harness straps out, 4 (fig. d).

3.From back of car seat, remove both harness adjustment

Shoulder

Harness

Adjuster

(Under

Adjuster

Cover )

4

3

(fig. d)

loops from metal harness plate (fig. e).

4.To lengthen shoulder harness:

-Re-attach metal harness plate in lower adjustment loops on shoulder harness straps (fig. f).

To shorten shoulder harness:

-Re-attach metal harness plate in upper adjustment loops on shoulder harness straps.

5.Check that loops are completely in slots of metal harness plate, and under tabs on both sides (fig. f).

Shoulder

Harness

Loop

Tab

(fig. e)

Metal

Harness Plate

(fig. f)

Image 40

Contents Combi Connection Infant Car Seat 8040 EN 122904.qxd 12/29/04 917 PM 8040 EN 122904.qxd 12/29/04 917 PM Table of Contents Located on back of seat pad Connection Infant Car Seat Parts Carry Infant CAR SeatCAR Seat Base Proper Use Check List Height and Weight Limits Use RecommendationsSecuring Infant In Car Seat 8040 EN 122904.qxd 12/29/04 917 PM Fig. a Click fig. b See Harness Use and Adjustment section Rolled TowelSelecting a Vehicle Seating Location Options For Securing a Car Seat Latch System On This Car Seat Latch SystemLatch System On Vehicles Fig. c Installation of Infant Car Seat in Vehicle Removal Of Infant Car Seat From Base Attaching Infant Car Seat To BaseZone Recline Indicator Line StripedSecuring Base With Latch System Anchor Connectors LowerButton Anchor BeltGreen Striped ZoneRepeat for connector on opposite side Fig. fRemoval Of Base Installed With Latch Storage Of Lower Anchorage Belt And Lower Anchor Connectors Anchor ConnectorSecuring Base With Vehicle Seat Belt Fig. b Recline Indicator Down over outside of blue belt guide 4 fig. d Fig. e Securing Infant Car Seat Without Base Fig. b Green Striped Zone Fig. d Shoulder Belt GuideRemoval Of Infant Car Seat From Vehicle Stroller or Travel System Use Harness Use and Adjustment Operation and AdjustmentUnder Changing Use Position and Harness Length Shoulder Harness LoopsShoulder Harness Under Adjuster CoverShoulder Harness Loop Tab Changing Shoulder Harness Slot Position Fig. d Adjustment Button Base Adjustment Adjuster HandleEgg Shock Foam Infant Insert Infant Insert Egg Shock Pad FoamCanopy Vehicle Seat Belt Systems Bight Belt Forward Buckle FlipLap Belts With Retractor Lap or Shoulder Belt Mounted on Front Door fig. f Combination Lap/Shoulder Belt with Free Sliding Latch Plate Locking Clip stored in pouch on back of car seat Car seat is secure Additional Information Certification Warm WeatherCare and Cleaning Cleaning SeatRe-use After a Crash Registration Information Limited Warranty 8040 EN 122904.qxd 12/29/04 917 PM Designed by Parents, for Parents