Yamaha RX-V496RDS owner manual Advanced Information, Setup codes, To use a second and third VCR

Page 50

PRESET REMOTE CONTROL

Advanced Information

Setup codes

You can set the code for the manufacturer of your component after pressing the component selector buttons other than AMP(TUNER).

1Turn on your component to be used.

2Press one of the component selector buttons which corresponds to the component to be controlled.

3 Press both VOLUME buttons (u/d) at the same time for about four seconds.

The indicator flashes twice.

4 Use the numeric buttons to enter the four-digit manufacturer’s code for the component to be used. Make sure that the indicator flashes twice.

If the indicator does not flash, repeat step 3 and re-enter the code.

5Press POWER (or any other button) on the

remote control to check if you have set the code correctly.

If your component cannot be controlled with the remote control, try setting another code for the same manufacturer.

Notes

You can set only one code for one mode.

In the DVD/LD and DVD MENU modes:

Be sure to press DVD/LD on the component selector before entering the code for the DVD/LD player. The code set in the DVD/LD mode is also simultaneously set in the DVD MENU mode. You cannot set the code for a DVD player after pressing DVD MENU on the component selector.

DVD MENU operations cannot be performed for some DVD players.

A second (and third) VCR can be controlled. Refer to “To use a second (and third) VCR” for details.

If your component does not respond to any of the codes listed for the manufacturer, use the original remote control supplied with your component.

To use a second (and third) VCR

You can control a second (and third) VCR in the CBL/SAT and DVD MENU modes if a cable TV or satellite tuner, or DVD player is not being used.

Note

If you want to control a second (and third) VCR in the DVD MENU mode, you must set the code for an LD player in the DVD/LD mode.

1Turn on the VCR to be used.

2 Press CBL/SAT or DVD

MENU on the component selector.

3Press both VOLUME

buttons (u/d) at the same time for about four seconds.

The indicator flashes twice.

4 Use the numeric buttons to enter the four-digit code for the second (and third) VCR. Make sure that the indicator flashes twice.

If the indicator does not flash, repeat step 3 and re-enter the code.

5Press POWER (or any other button) on the remote control to check if you have set the code correctly.

If the VCR cannot be controlled with the remote control, try setting another code for the same manufacturer.

48

Image 50
Contents RX-V496RDS For U.K. customers Special Instructions for U.K. ModelFeaturescontents Getting Started Checking the Package ContentsBattery Replacement ControlUsing the Remote Control Controls and Functions Front PanelTuning Mode AUTO/MAN’L Mono PRESET/TUNINGPRESET/TUNING, Edit PTY Seek ModeDisplay Remote Control Speakers to Be Used Speaker SetupSpeaker Placement Before Connecting Components ConnectionsOutdoor FM antenna Connecting the AntennasIndoor FM antenna included Outdoor AM antenna Connecting the AM loop antennaAM loop antenna included Ground GND terminalConnecting an Audio Component Phono terminalsVideo signal terminals Connecting a Video ComponentAudio signal terminals Digital audio signal terminalsVideo terminals Video AUX terminals on the front panelRear speaker terminals Connecting SpeakersMain speaker terminals Center speaker terminalSpeaker cables Connecting to the Main Speakers terminalsConnecting to the Rear and Center Speakers terminals AC Outlets Switched Impedance Selector SwitchConnecting the Power Supply Cords Turn up the volume Adjusting the Speaker BalanceBefore You Start Adjusting Using the Test Tone Set BASS, Treble and Balance to the 0 position Press TestWhen the adjustment is complete, press Test Test OFF appears on the display and the test tone stopsPress Speakers a or B Playing a SourceTo select a tape or an MD source To select the mainBGV background video function When you have finished using this unitTo mute the sound DTS Switching the input modeAuto AnalogEncoded with DTS Selecting a DSP Program On the remote controlDigital Sound Field Processor DSP Effect Off the effect speakersSound Field Program Dgtl Spectacle Program Subprogram Features MovieTheater Dgtl AdventureDolby Digital or DTS + 3 digital sound fields For Hi-Fi audio sourcesDolby Pro Logic + 2 digital sound fields Manual Tuning TuningAutomatic Tuning Press PRESET/TUNING Edit to turn z offStations only Automatic preset tuning optionsWhen automatic preset tuning is completed Hold down Memory for about three secondsManual Preset Tuning To Recall a Preset StationRecall preset station E1 Exchanging Preset StationsExample If you want to exchange preset station E1 with A5 Hold down PRESET/TUNING Edit for about three secondDescription of RDS Data Changing the RDS ModeReceiving RDS Stations Press PTY Seek Mode to set the unit in the PTY Seek mode To cancel this functionProgram types in the PTY mode PTY Seek FunctionMake sure that the EON indicator lights up on the display EON FunctionRecording a Source on TAPE, MD or Video Cassette Select the source you want to recordCenter SP Rear SP Main SP Bass OUT Main LVL Range DTS LFE Cntr Delay 10.MEM. Guard 11.SAT InputSET Menu D. LFEDescription of Each Item Center SPMIN Range Adjusting the dynamic rangeMAX Last Cntr Delay Adjusting the delay of the center soundAuto Sound Output Level of the Center Delay Time and Speaker Output LevelsDelay Time SubwooferAdjusting Method Setting the Sleep Timer Sleep TimerCanceling the Selected Sleep Timer Example To control Yamaha CD player Preset Remote ControlControlling the Components Connected to This Unit Display MD Description of Each ModeTAPE/MD Mode CD Mode DisplayDVD/LD Mode DVD Menu ModeTV Mode VCR ModeCBL/SAT Mode To use a second and third VCR Setup codesAdvanced Information Returning to the factory-set codes Enter the code numberGeneral TroubleshootingSymptom Cause Remedy Tuner Be heardOthers Remote controlWhen playing back a source encoded with DTS Specifications Glossary Cinema DSP Cinema DSPIndex Video components DVD/LD player, VCR and TVBSR SEG VCR CableSatellite Tuner CD Player DVD PlayerLD Player MD Recorder Tape DeckV502870-2 Quick Reference Card Amptuner TAPE/MD DVD/LDDVD Menu VCR CBL/SAT VCR Stop