Yamaha RX-V496RDS owner manual Cntr Delay Adjusting the delay of the center sound, Auto, Last

Page 41

SET MENU

8. DTS LFE (Adjusting the output			10.MEM. GUARD (Locking the
level of the LFE channel for DTS)			settings)
Control range: –10 dB to +10 dB (in 1 dB steps)			Choices: ON/OFF
Preset value: 0 dB			Preset position: OFF

Note

•This adjustment is effective only when DTS is being decoded and the selected source encoded with DTS contains LFE signals.

This adjusts the output level of the LFE channel. If the LFE signals are mixed with signals of other channels and they are directed to the same speakers, the ratio of the LFE signal level to the level of the other signals can be adjusted.

9.CNTR DELAY (Adjusting the delay of the center sound)

Control range: 0 ms to 5 ms (in 1 ms steps)

Preset value: 0 ms

Note

•This adjustment is only effective when Dolby Digital or DTS is being decoded and the selected source encoded with Dolby Digital or DTS contains center channel signals.

This adjusts the delay between the main sound (on the main channels) and dialog, etc. (on the center channel). The larger the value, the later the dialog, etc. is generated.

This makes sounds from the left main, center and right main speakers reach your listening position at the same time. This is achieved by delaying the sound from the center speaker if the distance from the center speaker to your listening position is shorter than the distance from the right and left main speaker to your listening position.

If you wish to prevent accidental alterations to the settings of the SET MENU and other adjustments on this unit, select the ON position. The following settings on this unit can be locked:

•Settings of other items in the SET MENU

•Settings in the TIME/LEVEL mode

•Settings when using TEST

11.SAT INPUT (Selecting the initial input mode for a source connected to the SAT/D-TV input terminals)

Choices: AUTO/LAST

Preset position: AUTO

The input mode for a source connected to the SAT/D-TV input terminals of this unit can be automatically set when the power of this unit is turned on. Refer to page 22 for details about the input mode.

AUTO

In this position, the input mode is always set to AUTO.

LAST

In this position, the input mode is automatically set to that selected the last time when the power of this unit was turned on.

ADVANCED OPERATION

English

39

Image 41

Contents RX-V496RDS Special Instructions for U.K. Model For U.K. customersFeaturescontents Battery Replacement Checking the Package ContentsGetting Started ControlUsing the Remote Control Front Panel Controls and FunctionsPRESET/TUNING, Edit PRESET/TUNINGTuning Mode AUTO/MAN’L Mono PTY Seek ModeDisplay Remote Control Speakers to Be Used Speaker SetupSpeaker Placement Connections Before Connecting ComponentsOutdoor FM antenna Connecting the AntennasIndoor FM antenna included AM loop antenna included Connecting the AM loop antennaOutdoor AM antenna Ground GND terminalPhono terminals Connecting an Audio ComponentAudio signal terminals Connecting a Video ComponentVideo signal terminals Digital audio signal terminalsVideo AUX terminals on the front panel Video terminalsMain speaker terminals Connecting SpeakersRear speaker terminals Center speaker terminalSpeaker cables Connecting to the Main Speakers terminalsConnecting to the Rear and Center Speakers terminals AC Outlets Switched Impedance Selector SwitchConnecting the Power Supply Cords Before You Start Adjusting Using the Test Tone Adjusting the Speaker BalanceTurn up the volume Set BASS, Treble and Balance to the 0 position Press TestTest OFF appears on the display and the test tone stops When the adjustment is complete, press TestTo select a tape or an MD source Playing a SourcePress Speakers a or B To select the mainBGV background video function When you have finished using this unitTo mute the sound Auto Switching the input modeDTS AnalogEncoded with DTS Digital Sound Field Processor DSP Effect On the remote controlSelecting a DSP Program Off the effect speakersSound Field Program Theater Program Subprogram Features MovieDgtl Spectacle Dgtl AdventureDolby Digital or DTS + 3 digital sound fields For Hi-Fi audio sourcesDolby Pro Logic + 2 digital sound fields Automatic Tuning TuningManual Tuning Press PRESET/TUNING Edit to turn z offWhen automatic preset tuning is completed Automatic preset tuning optionsStations only Hold down Memory for about three secondsTo Recall a Preset Station Manual Preset TuningExample If you want to exchange preset station E1 with A5 Exchanging Preset StationsRecall preset station E1 Hold down PRESET/TUNING Edit for about three secondDescription of RDS Data Changing the RDS ModeReceiving RDS Stations Program types in the PTY mode To cancel this functionPress PTY Seek Mode to set the unit in the PTY Seek mode PTY Seek FunctionEON Function Make sure that the EON indicator lights up on the displaySelect the source you want to record Recording a Source on TAPE, MD or Video CassetteSET Menu Range DTS LFE Cntr Delay 10.MEM. Guard 11.SAT InputCenter SP Rear SP Main SP Bass OUT Main LVL D. LFECenter SP Description of Each ItemMIN Range Adjusting the dynamic rangeMAX Last Cntr Delay Adjusting the delay of the center soundAuto Delay Time Delay Time and Speaker Output LevelsSound Output Level of the Center SubwooferAdjusting Method Setting the Sleep Timer Sleep TimerCanceling the Selected Sleep Timer Example To control Yamaha CD player Preset Remote ControlControlling the Components Connected to This Unit Display MD Description of Each ModeTAPE/MD Mode Display CD ModeDVD Menu Mode DVD/LD ModeTV Mode VCR ModeCBL/SAT Mode To use a second and third VCR Setup codesAdvanced Information Enter the code number Returning to the factory-set codesGeneral TroubleshootingSymptom Cause Remedy Be heard TunerOthers Remote controlWhen playing back a source encoded with DTS Specifications Cinema DSP Cinema DSP GlossaryVideo components DVD/LD player, VCR and TV IndexBSR SEG VCR CableSatellite Tuner CD Player DVD PlayerLD Player Tape Deck MD RecorderV502870-2 Amptuner TAPE/MD DVD/LD Quick Reference CardVCR Stop DVD Menu VCR CBL/SAT