Yamaha RX-V496RDS owner manual Display

Page 8

CONTROLS AND FUNCTIONS

Display

1t indicator

The “ t” indicator lights up when the built-in DTS decoder is turned on.

2DSP program indicators

8MEMORY indicator

This flashes for about five seconds after pressing MEMORY. During this period, the displayed station can be stored in the memory.

The name of the selected DSP program lights up in the following cases:

•When the tuner is selected as the input source.

•When DSP program No. 2, 3 or the subprogram “ENHANCED” of No.1 is selected.

3Multi-information display

This display shows various information: for example the name of the selected DSP program and the various settings during adjustment with the SET MENU. The current station frequency and band (FM or AM) also appear when the tuner is selected as the input source.

4Input source indicators

One of the arrows for these indicators lights up depending on which source is selected.

9RDS mode indicators

The name(s) of the RDS data offered by the currently received RDS station light(s) up. Illumination of the red indicator next to the RDS data name shows that the corresponding RDS mode is now selected.

0AUTO indicator

This lights up when the unit is in the automatic tuning mode.

qPTY HOLD indicator

This lights up while searching for stations in the PTY SEEK mode.

wEON indicator

This lights up when an RDS station that offers the EON data service is being received.

5TAPE/MD MONITOR indicator

This lights up when the tape deck or MD recorder, etc. is selected as the input source by pressing TAPE/MD MON / EXT. DECODER (or TAPE/MD).

6 g and o indicators

“ g ” lights up when the built-in Dolby Digital decoder is on and the signals of the selected source encoded with Dolby Digital are not in 2-channel. “ o ” lights up when the built-in Dolby Pro Logic decoder is on.

7 x indicator

“ x ” lights up when the built-in digital sound field processor is on.

eProgram type name indicators

The name of the selected program type lights up when the “EON” indicator lights up.

rSTEREO indicator

This lights up when an FM stereo broadcast with sufficient signal strength is being received.

tSignal-level indicator

This indicates the signal level of the station being received. If multipath interference is detected, the indication decreases.

ySLEEP indicator

This lights up while the built-in SLEEP timer is on.

6

Image 8

Contents RX-V496RDS For U.K. customers Special Instructions for U.K. ModelFeaturescontents Checking the Package Contents Battery ReplacementGetting Started ControlUsing the Remote Control Controls and Functions Front PanelPRESET/TUNING PRESET/TUNING, EditTuning Mode AUTO/MAN’L Mono PTY Seek ModeDisplay Remote Control Speakers to Be Used Speaker SetupSpeaker Placement Before Connecting Components ConnectionsOutdoor FM antenna Connecting the AntennasIndoor FM antenna included Connecting the AM loop antenna AM loop antenna includedOutdoor AM antenna Ground GND terminalConnecting an Audio Component Phono terminalsConnecting a Video Component Audio signal terminalsVideo signal terminals Digital audio signal terminalsVideo terminals Video AUX terminals on the front panelConnecting Speakers Main speaker terminalsRear speaker terminals Center speaker terminalSpeaker cables Connecting to the Main Speakers terminalsConnecting to the Rear and Center Speakers terminals AC Outlets Switched Impedance Selector SwitchConnecting the Power Supply Cords Adjusting the Speaker Balance Before You Start Adjusting Using the Test ToneTurn up the volume Set BASS, Treble and Balance to the 0 position Press TestWhen the adjustment is complete, press Test Test OFF appears on the display and the test tone stopsPlaying a Source To select a tape or an MD sourcePress Speakers a or B To select the mainBGV background video function When you have finished using this unitTo mute the sound Switching the input mode AutoDTS AnalogEncoded with DTS On the remote control Digital Sound Field Processor DSP EffectSelecting a DSP Program Off the effect speakersSound Field Program Program Subprogram Features Movie TheaterDgtl Spectacle Dgtl AdventureDolby Digital or DTS + 3 digital sound fields For Hi-Fi audio sourcesDolby Pro Logic + 2 digital sound fields Tuning Automatic TuningManual Tuning Press PRESET/TUNING Edit to turn z offAutomatic preset tuning options When automatic preset tuning is completedStations only Hold down Memory for about three secondsManual Preset Tuning To Recall a Preset StationExchanging Preset Stations Example If you want to exchange preset station E1 with A5Recall preset station E1 Hold down PRESET/TUNING Edit for about three secondDescription of RDS Data Changing the RDS ModeReceiving RDS Stations To cancel this function Program types in the PTY modePress PTY Seek Mode to set the unit in the PTY Seek mode PTY Seek FunctionMake sure that the EON indicator lights up on the display EON FunctionRecording a Source on TAPE, MD or Video Cassette Select the source you want to recordRange DTS LFE Cntr Delay 10.MEM. Guard 11.SAT Input SET MenuCenter SP Rear SP Main SP Bass OUT Main LVL D. LFEDescription of Each Item Center SPMIN Range Adjusting the dynamic rangeMAX Last Cntr Delay Adjusting the delay of the center soundAuto Delay Time and Speaker Output Levels Delay TimeSound Output Level of the Center SubwooferAdjusting Method Setting the Sleep Timer Sleep TimerCanceling the Selected Sleep Timer Example To control Yamaha CD player Preset Remote ControlControlling the Components Connected to This Unit Display MD Description of Each ModeTAPE/MD Mode CD Mode DisplayDVD/LD Mode DVD Menu ModeTV Mode VCR ModeCBL/SAT Mode To use a second and third VCR Setup codesAdvanced Information Returning to the factory-set codes Enter the code numberGeneral TroubleshootingSymptom Cause Remedy Tuner Be heardOthers Remote controlWhen playing back a source encoded with DTS Specifications Glossary Cinema DSP Cinema DSPIndex Video components DVD/LD player, VCR and TVBSR SEG VCR CableSatellite Tuner CD Player DVD PlayerLD Player MD Recorder Tape DeckV502870-2 Quick Reference Card Amptuner TAPE/MD DVD/LDDVD Menu VCR CBL/SAT VCR Stop