Yamaha RX-V496RDS owner manual Returning to the factory-set codes, Enter the code number

Page 51

■Returning to the factory-set codes

To return all components to the factory-set codes, follow these steps.

1Press one of the component selector buttons other than AMP(TUNER).

2Press both VOLUME

buttons (u/d) at the same time for about four seconds.

The indicator flashes twice.

3 Enter the code number “9990”.

Make sure that the indicator flashes twice.

PRESET REMOTE CONTROL

To return each component to the factory-set codes, follow these steps.

1Press one of the component selector buttons which corresponds to the component to be returned to the factory-set code.

2 Press both VOLUME buttons (u/d) at the same time for about four seconds.

The indicator flashes twice.

3 Enter the code number “0000”.

Make sure that the indicator flashes twice.

The following codes are factory set.

Component	Component	Code
selector button	Component	Code
selector button

TV	TV	0101

CBL/SAT	Satellite tuner	0006

VCR	VCR	0002

DVD/LD	DVD player	0008	(YAMAHA DVD player)

CD	CD player	0005	(YAMAHA CD player)

TAPE/MD	Tape deck	0004	(YAMAHA Tape deck)

We recommend that you write all the code numbers you have set on the “Quick Reference Card”.

ADVANCED OPERATION

English

49

Image 51

Contents RX-V496RDS Special Instructions for U.K. Model For U.K. customersFeaturescontents Control Checking the Package ContentsBattery Replacement Getting StartedUsing the Remote Control Front Panel Controls and FunctionsPTY Seek Mode PRESET/TUNINGPRESET/TUNING, Edit Tuning Mode AUTO/MAN’L MonoDisplay Remote Control Speaker Setup Speaker PlacementSpeakers to Be Used Connections Before Connecting ComponentsConnecting the Antennas Indoor FM antenna includedOutdoor FM antenna Ground GND terminal Connecting the AM loop antennaAM loop antenna included Outdoor AM antennaPhono terminals Connecting an Audio ComponentDigital audio signal terminals Connecting a Video ComponentAudio signal terminals Video signal terminalsVideo AUX terminals on the front panel Video terminalsCenter speaker terminal Connecting SpeakersMain speaker terminals Rear speaker terminalsConnecting to the Main Speakers terminals Connecting to the Rear and Center Speakers terminalsSpeaker cables Impedance Selector Switch Connecting the Power Supply CordsAC Outlets Switched Set BASS, Treble and Balance to the 0 position Press Test Adjusting the Speaker BalanceBefore You Start Adjusting Using the Test Tone Turn up the volumeTest OFF appears on the display and the test tone stops When the adjustment is complete, press TestTo select the main Playing a SourceTo select a tape or an MD source Press Speakers a or BWhen you have finished using this unit To mute the soundBGV background video function Analog Switching the input modeAuto DTSEncoded with DTS Off the effect speakers On the remote controlDigital Sound Field Processor DSP Effect Selecting a DSP ProgramSound Field Program Dgtl Adventure Program Subprogram Features MovieTheater Dgtl SpectacleFor Hi-Fi audio sources Dolby Pro Logic + 2 digital sound fieldsDolby Digital or DTS + 3 digital sound fields Press PRESET/TUNING Edit to turn z off TuningAutomatic Tuning Manual TuningHold down Memory for about three seconds Automatic preset tuning optionsWhen automatic preset tuning is completed Stations onlyTo Recall a Preset Station Manual Preset TuningHold down PRESET/TUNING Edit for about three second Exchanging Preset StationsExample If you want to exchange preset station E1 with A5 Recall preset station E1Changing the RDS Mode Receiving RDS StationsDescription of RDS Data PTY Seek Function To cancel this functionProgram types in the PTY mode Press PTY Seek Mode to set the unit in the PTY Seek modeEON Function Make sure that the EON indicator lights up on the displaySelect the source you want to record Recording a Source on TAPE, MD or Video CassetteD. LFE Range DTS LFE Cntr Delay 10.MEM. Guard 11.SAT InputSET Menu Center SP Rear SP Main SP Bass OUT Main LVLCenter SP Description of Each ItemRange Adjusting the dynamic range MAXMIN Cntr Delay Adjusting the delay of the center sound AutoLast Subwoofer Delay Time and Speaker Output LevelsDelay Time Sound Output Level of the CenterAdjusting Method Sleep Timer Canceling the Selected Sleep TimerSetting the Sleep Timer Preset Remote Control Controlling the Components Connected to This UnitExample To control Yamaha CD player Description of Each Mode TAPE/MD ModeDisplay MD Display CD ModeDVD Menu Mode DVD/LD ModeVCR Mode CBL/SAT ModeTV Mode Setup codes Advanced InformationTo use a second and third VCR Enter the code number Returning to the factory-set codesTroubleshooting Symptom Cause RemedyGeneral Be heard TunerRemote control When playing back a source encoded with DTSOthers Specifications Cinema DSP Cinema DSP GlossaryVideo components DVD/LD player, VCR and TV IndexBSR SEG Cable Satellite TunerVCR DVD Player LD PlayerCD Player Tape Deck MD RecorderV502870-2 Amptuner TAPE/MD DVD/LD Quick Reference CardVCR Stop DVD Menu VCR CBL/SAT