Pelco IP110 manual Wiring Tables, CAT5 Cable, Refer to for pin descriptions, PoE

Wiring Tables

CAT5 CABLE

Connect a Cat5 cable to the RJ-45 network connector. The 8-pin connector includes video and PoE for the camera. PoE (IEEE 802.3af) injects power over the same cabling that carries the network data, eliminating the need for a separate power supply. This simplifies the installation and operation of the camera without any degradation of network performance.

NOTE: The IP110 Camclosure will autosense and work with either a cross over cable or straight cable.

Refer to Figure 9 for pin descriptions

1 8 8

81

7

6

5

4

3

2

1

Pin	Function
1	TX+
2	TX-
3	RX+
4	PoE 1-2
5	PoE 1-2
6	RX-
7	PoE 3-4
8	PoE 3-4

Figure 9. Cat5 Cable Pin Descriptions

16 C3432M-G (4/09)