SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
PRESETS
PRESET NUMBER | 1 |
* * * PRESET NOT DEFINED * * * |
|
<EDIT PRESET LABEL> |
|
<EDIT PRESET SCENE> |
|
<EDIT CAMERA SETTINGS> |
|
<MOTION DETECTION> |
|
<EDIT SCHEDULE> |
|
<CLEAR PRESET> |
|
<CLEAR CAMERA SETTINGS> |
|
BACK |
|
EXIT |
|
REFERENCE INFORMATION | - |
AZIMUTH | |
ELEVATION | - |
ZOOM RATIO | - |
CUSTOM CAMERA SETTINGS | - |
4.Edit preset camera settings:
a.Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.
b.Press Iris Open. The EDIT CAMERA SETTINGS window appears on the monitor. Refer to Camera on page 38 and Advanced Camera Settings on page 42 to change preset camera settings.
c.To edit the camera settings schedule, use the joystick to position the cursor beside EDIT SCHEDULE. Press Iris Open.
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 80) with the following exceptions. In the Edit Schedule menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 83.
Notes:
•For 23X and 35X models, there are two additional options available for the IR cut filter that are only available when programming a preset. The additional settings are IN and OUT. If the IR cut filter is set to IN, the preset scene will be in color. If the IR cut filter is set to OUT, the preset scene will be in
•You can copy camera settings from one preset to another preset. To copy camera settings do the following:
(1)Use the joystick to position the cursor beside COPY CAMERA SETTINGS.
(2)Press Iris Open. The cursor moves to the right.
(3)Move the joystick up or down to view selections. Press Iris Open to enter selection.
* This setting applies only to Pressurized Spectra IV dome systems.
| 59 |