NAD C370 Stereo Integrated Amplifier

QUICK START

1. Connect the speakers to the Speaker A terminals and sources to the relevant rear input sockets.

	2. Plug in the AC power cord.
	3. Press the POWER button to turn the NAD C370 on.
	4. Press the required input selector.
	NOTES ON INSTALLATION
	Your NAD C370 should be placed on a firm, level surface. Avoid
	placing the unit in direct sunlight or near sources of heat and
	dampness. Allow adequate ventilation. Do not place the unit on a
	soft surface like a carpet. Do not place unit in an enclosed
	position, such a bookcase or cabinet, that may impede the air-flow
	through the ventilation slots. Make sure the unit is switched off
	before making any connections.
	The RCA sockets on your NAD C370 are colour coded for
	convenience. Red and white are Right and Left audio respectively,
	and yellow for NAD Link. Use high quality leads and sockets for
	optimum performance and reliability. Ensure that leads and
	sockets are not damaged in any way and all sockets are firmly
	pushed in.
	For best performance, use quality speaker leads of 16 gauge
	(1.5mm) thickness or more. If the unit is not going to be used for
	some time, disconnect the plug from the AC socket.
	Should water get into your NAD C370, shut off the power to the
	unit and remove the plug from the AC socket. Have the unit
	inspected by a qualified service technician before attempting to
	use it again. Do not remove the cover, there are no user-
	serviceable parts inside. Use a dry soft cloth to clean the unit.
	If necessary, lightly dampen the cloth with soapy water. Do not use
	solutions containing benzol or other volatile agents.
GB	REAR PANEL CONNECTIONS (FIGURE 1)
	1. DISC INPUT
	Input for additional line level input signals such as CD, Mini Disc
	player or the output signal from a step-up amplifier for a
	turntable. Use a twin RCA-to-RCA lead to connect the auxiliary
	unit's left and right 'Audio Outputs' to this input.
	2. CD INPUT
	Input for a CD or other line-level signal source. Use a twin RCA-
	to-RCA lead to connect the CD player's left and right 'Audio
	Outputs' to this input. The NAD C370 only accepts analogue
	signals from your CD player.
	3. VIDEO INPUT
	Input for the audio signal from a stereo VCR (or stereo
	TV/Satellite/Cable receiver) or other line-level audio source.
	Using twin RCA-to-RCA leads, connect to the left and right 'Audio
	Out' of the unit to these inputs. Note: These are audio inputs only.
	4. AUX INPUT
	Input for additional line level input signals such as another CD
	player. Use a twin RCA-to-RCA lead to connect the auxiliary unit's
	left and right 'Audio Outputs' to this input.

5. TUNER INPUT

Input for a Tuner or other line-level signal source. Use a twin RCA- to-RCA lead to connect the Tuner left and right 'Audio Outputs' to this input.

6. TAPE 2 IN, OUT

Connections for analogue recording and playback to an audio tape recorder of any type. Using twin RCA-to-RCA leads, connect to the left and right 'Audio Output' of the tape machine to the TAPE 2 IN sockets for playback. Connect the left and right 'Audio Input' of the tape machine to the TAPE 2 OUT sockets for recording.

7. TAPE 1 IN, OUT

Connections for analogue recording and playback to a secondary audio tape recorder of any type. Using twin RCA-to-RCA leads, connect to the left and right 'Audio Output' of the tape machine to the TAPE 1 IN sockets for playback and tape monitoring. Connect the left and right 'Audio Input' of the tape machine to the TAPE 1 OUT sockets for recording.

8. PRE OUT 1

In normal use the PRE OUT 1 is connected to the Main-In sockets (No. 9) with the links supplied. The NAD C370 allows for the connection of multiple power amplifiers. If you are using a single, external stereo power amplifier, disconnect the links to the Main- In sockets. The C370's internal power amplifier is now disconnected. Use a twin RCA-to-RCA lead to connect to the left and right 'Audio Input' of the Power amp to the PRE OUT 1 sockets.

If you are using an additional stereo power amplifier specifically for Bi-Amping, use the PRE OUT 1 sockets to connect the power amplifier with the lowest gain of the pair. Refer also to chapter "Bi- Amping" for more information.

NOTES: Always turn the C370 and associated external power amplifiers off before connecting or disconnecting anything to the PRE-OUT 1, 2 and MAIN-IN sockets.

The PRE-OUT 1&2 output signals will be affected by the NAD C370's volume and tone control settings.

9. MAIN IN

Connections to an external pre-amplifier or processor, such as a surround-sound decoder. In normal use these are connected to the Pre-Out 1 sockets (No. 8) with the links supplied. To connect your NAD C370 to external processor or pre-amplifier first remove these links. Use a twin RCA-to-RCA lead to connect to the left and right 'Audio Output' of the pre-amp or processor to the Main-In sockets.

NOTES: Always turn the C370 and associated external power amplifiers off before connecting or disconnecting anything to the PRE-OUT 1, 2 and MAIN-IN sockets.

The PRE-OUT 1&2 output signals will be affected by the NAD C370's volume and tone control settings.

10. PRE OUT 2

The PRE OUT 2 sockets can be used to drive an additional power amplifier. The VOLUME Pre-Out 2 control (No. 11) can be used to reduce the output level of the pre-amplifier to the power amplifier by up to -12dB. With the VOLUME Pre-Out 2 control set to the maximum position (at the 0dB position), the output level will be identical to that of the PRE OUT 1 sockets.

C370 specifications

The NAD C370 is a powerful integrated amplifier that has earned a reputation for its high performance and exceptional sound quality. Building on NAD's long history of engineering innovative audio solutions, the C370 is designed to meet the needs of discerning audiophiles and casual listeners alike.

One of the main features of the C370 is its robust power output. The amplifier delivers 150 watts per channel into 8 ohms, which allows it to comfortably drive a wide range of speakers with ease. This high power output translates into dynamic sound reproduction, making it ideal for both music and home theater applications.

The C370 incorporates NAD’s proprietary PowerDrive technology, which enables it to deliver high current when needed, ensuring that transients are handled smoothly. This technology helps maintain the clarity and punch of audio signals, even at higher volumes. Furthermore, the amplifier has a solid build quality, featuring a heavy-duty chassis that minimizes vibrations and ensures long-term durability.

Another significant characteristic of the NAD C370 is its utilization of advanced circuitry. The amplifier uses a sophisticated feedback network that minimizes distortion and enhances linearity across the frequency spectrum. This results in an audio performance that is both clean and faithful to the source material. The low noise floor of the C370 ensures that even the most subtle details in a recording are preserved, making for an immersive listening experience.

In addition to its exceptional amplification capabilities, the NAD C370 offers an array of connectivity options. With multiple line-level inputs, a dedicated phono input for turntables, and preamp outputs, it is versatile enough to accommodate a wide range of sources. The inclusion of a headphone output also adds to its functionality, allowing for private listening sessions without sacrificing audio quality.

The C370 features an easy-to-use remote control, which enhances user convenience when navigating through its various functions. The user interface is intuitive, making it simple to adjust settings and switch between inputs.

In summary, the NAD C370 is an integrated amplifier that combines high power, advanced technology, and versatile connectivity options. With its emphasis on audio fidelity and robust performance, it stands as an appealing choice for audiophiles looking to elevate their sound experience. Whether listening to music or enjoying a movie, the C370 is designed to deliver an exceptional audio experience that meets the expectations of even the most critical listeners.