Standard Accessories, Optional Accessories, Lens Care

	Standard Accessories
Slip-on leatherette front lens cap	Strap
Rear lens cap LF-1	Lens hood HK-20
52mm screw-in filter NC	Heavy duty case CT-401
Holder for gelatine filters

	Optional Accessories
Other 52mm screw-in filters	Teleconverter TC-14E
Teleconverter TC-14B	Teleconverter TC-20E
Teleconverter TC-301

SPECIFICATIONS

Focal length: 400mm

Maximum aperture: f/2.8

Lens construction: 10 elements in 7 groups (plus dustproof glass plate built into front)

Picture angle: 6° 10'

Distance scale: Graduated in meters and feet from 3.3m (12 ft.) to infinity (°°)

Distance information: Output into camera body

Aperture scale: f/2.8—f/22 on both standard and aperture-direct-readout scales

Minimum aperture lock: Provided

Diaphragm: Fully automatic

Exposure measurement: Via full-aperture method with AI cameras or cameras with CPU interface system via stop-down method for other cameras

Focusing: Nikon Internal Focusing (IF) system

Tripod mounting: Built-in tripod mounting collar rotatable through 360°.

Lens hood: Provided

Filters: Slip-in glass filter holder accepts 52mm screw-in filters; gelatine filter holder accepts gelatine filters

Mount: Nikon bayonet mount

Dimensions: Approx. 158mm (6.2 in.) dia. x 376mm (14.8 in.) extension from flange; approx. 384mm (15.2 in.) long (overall)

Weight: Approx. 6,300g (222.2 oz.)

LENS CARE

•Clean lens surface with a blower brush. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion from center to outer edge, taking care not to leave traces and not to touch the other lens parts.

If you use ether in cleaning the lens, a smudge sometimes appears on the surface of a multi-coated lens. If this happens, wipe it again with a cotton cloth moistened with alcohol.

•Take care in cleaning the rear part of the lens with a spraygun-type blower because its strong stream of air may damage the lens diaphragm blades. To avoid damage, set the lens at full aperture and use the blower far enough away.

•Always protect the lens surface from dirt or damage. The lens hood also helps to protect the lens.

•Keep the lens cap in place whenever the lens is not in use.

•If you will not use the lens for a long time, protect it from rust and mold by storing it in a cool, dry place. Also, do not store in direct sunlight, and keep it away from naphthalene or camphor.

•Be careful not to get the lens wet or drop it in water. Water on the lens may cause malfunction.

• • • • . • •