Kodak C650 manual Date and Time Imprinting, Unloading the Film, Setting the date and time

DATE AND TIME IMPRINTING

Traditional cameras print date and/or time information directly onto the film. Your camera uses the film’s magnetic data-recording capability to record date and time information which your photofinisher can imprint on the back of your photographs. This camera has a quartz clock and automatic calendar through the year 2099. You can record the date in a choice of three date formats (year/month/day, month/day/ year or day/month/year) and one time format (hour/minute).

Setting the date and time

1.Press the SELECT BUTTON (2)

repeatedly to
scroll and
select	SELECT
desired date	ENTER
format.	ON
2. Press the
select button	OFF
again and

hold the button for approximately 2 seconds until the first number(s) of

the date/time position “blinks.”

3.Press the ENTER BUTTON (3) to change the “blinking” number(s).

4.Press the select button to store the selected number(s) and to activate the next “blinking” number(s) (follow steps 3 and 4 to complete your selection).

UNLOADING THE FILM

Automatic rewind

The camera automatically rewinds the film into the cassette after the last exposure.

1.Wait for the film to completely rewind into the film cassette.

•When the motor stops running, the FRAME COUNTER (30) will indicate “0.”

2.Push the FILM-DOOR LATCH (21) up.

•The motor will run for a brief time, then the film door will open.

3.Remove the film cassette from the camera and reload with new KODAK ADVANTIX Film.

•The FSI on the fully-exposed film cassette will be at ✖ (#3 position) and the LCD panel will display “E.”

17